Quality Engineers

Quality Engineers

Quality Engineers

Ambala Cantt, Ambala, Haryana

Fluid Machinery Lab

Our range of products include pelton wheel turbine test rig, pressure flow packed bed, francis turbine test rig, kaplan turbine test rig, centrifugal pump test rig and reciprocating pump test rig.

Pelton Wheel Turbine Test Rig

REQUEST CALLBACK

Ask for Price

Product Details:

Electricity5 kW, 440V AC, Three Phase
Floor Area1.5 x 0.75 m
Output Power1 kW
Discharge400 LPM
Supply Head25 m
Speed1000 RPM
Tanks MaterialStainless Steel
Water CirculationCentrifugal Pump, Standard make,Capacity 5 HP, 3 Phase, 2800 RPM
Sump Tank Capacity200 Liters
Discharge Measurement Pitot Tube with Manometer
Spear MaterialStainless Steel
Nozzle MaterialStainless Steel
DynamometerRope Brake type

We are among the listed manufacturers, exporters and suppliers of the best quality Pelton Wheel Turbine Test Rig. The offered range is manufactured using the best grade raw material and sophisticated technology under the supervision of skilled professionals following the set industry parameters. This product is tested on well-defined parameters of quality using advanced testing machines. In addition to this, we offer this product to our precious clients at a market-leading price.

Technical Description:
  • Pelton Wheel Turbine is only impulsed water turbine now in common use named in honour of Sir L. A. Pelton (1829-1908) of California, USA. It is a tangential flow impulse turbine. The water strikes the buckets along the tangent of the runner.The energy available at the inlet of the turbine is only kinetic energy.The pressure at the inlet and outlet of the turbine is atmospheric.This turbine is used for high heads.
  • The present set-up consists of a runner. The buckets are mounted on the runner. The water is fed to the turbine, through SS nozzle with an SS spear, by means of Centrifugal Pump, tangentially to the runner. The flow of water into the turbine is regulated by adjusting the spear position by the help of a given hand wheel. The runner is directly mounted on one end of a central SS shaft and another end is connected to a brake arrangement.
  • The circular window of the turbine casing is provided with a transparent acrylic sheet for observation of flow onto the buckets.This runner assembly is supported by rigid MS structure. The load is applied to the turbine with the help of this brake dynamometer so that the efficiency of the turbine can be calculated. The pressure gauge is fitted at the inlet of the turbine to measure the total supply head to the turbine.

Learning Objectives/Experiments
:
  • To study the operation of a Pelton Wheel Turbine.
  • To determine the Output Power of Pelton Wheel Turbine.
  • To determine the Turbine Efficiency

Control Panel:

  • Energy Meter
  • L&T make Starter, Mains Indicator,
  • MCB for overload protection.


Scope of Delivery:

  • 1 Self Contained "Pelton Wheel Turbine Test Rig" Apparatus
  • 1 Instruction Manual consisting of experimental procedures, block diagram etc.

    Yes! I am Interested

    Pressure Flow Packed Bed

    REQUEST CALLBACK

    Ask for Price

    Product Details:

    Packed ColumnMaterial Borosilicate Glass with both end made of Stainless Steel
    PackingMaterial Borosilicate Glass Raschig rings
    Size8-10 mm approx
    MaterialStainless Steel

    We are offering a wide range of Pressure Flow Packed Bed. This equipment is highly appreciated among our customer for their flawless design, hassle free installation and easy maintenance. The equipment offered by us is equipped with a rotameter and a manometer for the flow and drop measurement of water respectively.

    Yes! I am Interested

    Francis Turbine Test Rig

    REQUEST CALLBACK

    Ask for Price

    Product Details:

    MaterialStainless steel
    UsagesIndustries
    Machine TypeAutomatic

    We are counted among the most prominent manufacturers, traders and exporters of premium quality Francis Turbine Test Rig. Our professionals manufacture this apparatus in compliance with the industry laid parameters, using good quality raw materials. This apparatus undergoes several stages of quality checks to ensure of the best quality. Appreciated for sturdy construction, optimum water circulation and cost-effectiveness, this apparatus is highly demanded around the globe.

    Technical Description:
    • Francis Turbine is a reaction turbine, which was developed by an English born American Engineer Sir J. B. Francis.
    • The water enters the turbine through the outer periphery of the runner in the radial direction and leaves the runner in an axial direction and hence it is called a mixed flow turbine.
    • As the water flows to the runner, a part of pressure energy goes on changing into kinetic energy.
    • Thus the water through the runner is under pressure.
    • The runner is completely enclosed in an air tight casing and the casing & runner is always full of water.
    • The present set-up consists of a runner. The water is fed to the turbine by means of Centrifugal Pump, radially to the runner.
    • The runner is directly mounted on one end of a central SS shaft and another end is connected to a brake arrangement.
    • The circular window of the turbine casing is provided with a transparent acrylic sheet for observation of flow on to the runner.
    • This runner assembly is supported by thick cast iron pedestal.The load is applied to the turbine with the help of brake arrangement so that the efficiency of the turbine can be calculated.
    • A draught tube is fitted on the outlet of the turbine. The set-up is complete with guide mechanism. Pressure and Vacuum gauges are fitted at the inlet and outlet of the turbine to measure the total supply head on the turbine.

    Learning Objectives/Experiments:
    • To study the operation of a Francis Turbine.
    • To determine the Output Power of Francis Turbine.
    • To determine the Turbine Efficiency

    Required for Operation:
    • Water Supply and Drain.
    • Water Circulation: Centrifugal Pump, Standard Make, Capacity 5 HP Three Phase.
    • Discharge Measurement: Pitot Tube with Manometer
    • The whole set-up is ingeniously designed and schematically arranged on a powder-coated rigid structure


    Control Panel:

    • Energy Meter
    • Standard make On/Off switch, Mains Indicator etc.


    Scope of Delivery:

    • 1 Self Contained "Francis Turbine Test Rig" Apparatus
    • 1 Instruction Manual consisting of experimental procedures, block diagram etc.

      Yes! I am Interested

      Kaplan Turbine Test Rig

      REQUEST CALLBACK

      Ask for Price

      Product Details:

      Tanks MaterialStainless Steel
      Output Power1 kW
      Discharge1000 LPM
      Supply Head5-8 meter
      Normal Speed 2000 RPM
      DynamometerRope Brake type
      Water CirculationCentrifugal Pump, CRI/Standard, Make, Capacity 5 HP, 3 Phase
      Floor Area required3.5 x 1.5 m
      Electricity SupplyThree phase, 420 VAC, 50 Hz, 32 Amp. 4 Pole MCB with earth connection
      Mercury for Manometer250 gms
      Sump Tank Capacity200 Liters
      Discharge Measurement Pitot Tube with Manometer

      We are offering a wide range of Kaplan Turbine Test Rig. Highly acknowledged for its corrosion resistance, shock proof body construction and hassle-free operation, offered equipment is extensively demanded among our huge client base.

      Technical Description:

      Kaplan Turbine is an axial flow reaction turbine named in honour of Dr B. Kaplan, a German Engineer.This turbine is suitable for the low head. The power produced by a turbine is proportional to QH. As the head (H) decreases the discharge (Q) must increase to produce the same power.The present set-up consists of a scroll casing housing a runner.Water enters the turbine through the stationary guide vanes and passes through the runner axially. The runner has a hub and airfoil vanes, which are mounted on it.The water is fed to the turbine by means of Centrifugal Pump.The runner is directly mounted on one end of a central shaft and another end is connected to a brake arrangement. A transparent hollow cylinder made of acrylic is fitted in between the draught tube and the casing for observation of flow on to the airfoil vanes. This runner assembly is supported by thick cast iron pedestal. The load is applied to the turbine with the help of drum brake arrangement so that the efficiency of the turbine can be calculated.The set-up is supplied with the control panel. Pressure and Vacuum gauges are fitted at the inlet and outlet of the turbine to measure the total supply head on the turbine.

      Learning Objectives/Experiments
      :
      • To study the operation of Kaplan turbine
      • To determine the Output Power of Kaplan Turbine
      • To determine the turbine efficiency pressure Measurement: Pressure Gauge & Vacuum Gauge
      • Piping & Fittings: Pipes & fittings with flow control valves of suitable size
      • The whole set-up is ingeniously designed and schematically arranged on a powder-coated rigid structure

      Control Panel:

      • Pressure Gauge & Vacuum Gauge
      • Standard make On/Off switch, Mains Indicator etc.

      Scope of Delivery:

      • 1 Self Contained "Kaplan Turbine Test Rig" Apparatus
      • 1 Instruction Manual consisting of experimental procedures, block diagram etc.

      Yes! I am Interested

      Centrifugal Pump Test Rig

      REQUEST CALLBACK

      Ask for Price

      Product Details:

      Drive1 HP DC Motor with Thyristor controlled DC drive for variable speed.
      Head12 m
      Pump Capacity1 HP
      Floor Area2 x 1 m
      Energy measurementL&T make, Electronic Energy meter.
      RPM measurementDigital RPM Indicator with a Proximity sensor.
      Stop watchElectronic
      Power Supply1kW, 220V AC, Single Phase.
      Pressure GaugeBourdon type
      Sump Tank Capacity110 Liters.
      Flow Measurement Capacity70 Liters.
      Clear Water FlowMedium
      Pump Speed2800 RPM

      Technical Description:

      The present Centrifugal Pump Test Rig is a self-contained unit operated on closed circuit basis containing a sump tank. The set-up consists of a Centrifugal pump coupled with a DC Motor. Power input to the DC Motor is varied by means of a Thyristor controlled DC Drive to vary the RPM of the motor. An RPM Indicator with Proximity sensor indicates the RPM of Pump. The flow of water is measured by using measuring tank and stopwatch. A vacuum gauge is fitted on suction line and the Pressure gauge is fitted on the delivery line to measure the pressure.

      Learning Objectives/Experiments
      :
      • To determine total head, Pump Output, overall efficiency and pump efficiency of the centrifugal pump
      • To plot Head vs Discharge, Pump efficiency vs Discharge, Pump Output vs Discharge
      • Tanks will be made of Stainless Steel.
      • The whole set-up is ingeniously designed and schematically arranged on a powder-coated rigid structure

      Control Panel:

      • Electronic Energy meter
      • Standard make On/Off switch, Mains Indicator etc.

      Scope of Delivery:
      • 1 Self Contained "Centrifugal Pump Test Rig" Apparatus
      • 1 Instruction Manual consisting of experimental procedures, block diagram etc.

      Yes! I am Interested

      Reciprocating Pump Test Rig

      REQUEST CALLBACK

      Ask for Price

      Product Details:

      Floor Area Required1.5 m x 0.75 m
      Pressure GaugeBourdon type
      RPM measurementDigital RPM Indicator with Proximity sensor.
      Tanks MaterialStainless Steel
      Tank Capacity40 Liters.
      Sump Tank MaterialStainless Steel
      Sump Tank Capacity65 Ltrs.
      Pump Capacity1 HP
      Pump Speed250 RPM
      Electricity SupplySingle Phase, 220 V AC, 50 Hz, 5-15amp
      Head5 kg/cm2

      We are offering a wide range of Reciprocating Pump Test Rig (Variable Speed With Swinging Field Dynamometer)

      Technical Description:
      The present Reciprocating Pump Test Rig is a self-contained unit operated on closed circuit basis containing a sump tank. The set-up consists of a Double acting, Single Cylinder Reciprocating Pump coupled with a DC Motor Power input to the DC Motor is varied by means of a Thyristor controlled DC Drive to vary the RPM of a motor. An RPM Indicator with Proximity sensor indicates the RPM of Pump. The flow of water is measured by using a measuring tank and stop watch. A vacuum gauge is fitted on suction line and a Pressure gauge is fitted on the delivery line to measure the pressure.

      Learning Objectives/Experiments
      :
      • To determine total head, overall efficiency, pump efficiency and volumetric efficiency of the reciprocating pump.
      • To plot Graph: Head vs Discharge Pump efficiency vs Discharge.

      Control Panel:
      • Pressure Gauge
      • Electronic Energy meter
      • Digital RPM Indicator
      • Standard make On/Off switch, Mains Indicator etc.

      Scope of Delivery:

      • 1 Self Contained "Reciprocating Pump Test Rig" Apparatus
      • 1 Instruction Manual consisting of experimental procedures, block diagram etc.

      Yes! I am Interested

      Gear Pump Test Rig

      REQUEST CALLBACK

      Ask for Price

      Product Details:

      Drive1 HP DC motor with Thyristor controlled DC Drive for variable speed.
      Sump Tank Capacity35 Liters
      Bourdon Type Vacuum Gauge, Pressure Gauge
      RPM measurementDigital RPM Indicator with Proximity sensor
      Energy measurementElectronic Energy meter, L&T make.
      Flow MeasurementUsing Measuring Tank (Capacity 20 Ltrs.(approx.)) and Electronic Stop Watch
      Floor Area required1.5 x 0.75 m
      OilSAE 20W 40 (30 litrs)
      Electricity SupplySingle Phase, 220 V AC, 50 Hz, 5-15 Amp
      Pump Speed1500 RPM
      Pressure5kg/cm2(max.)

      The present Gear Pump Test Rig ( Variable Speed With Swinging Field Dynamometer) is a self-contained unit operated on closed circuit basis containing a sump tank. The set-up consists of a Gear Pump having a pair of meshed gears, coupled with a DC Motor. Power input to the DC Motor is varied by means of a Thyristor controlled DC Drive to vary the RPM of motor. A RPM Indicator with Proximity sensor indicates the RPM of Pump. Flow of fluid is measured by using measuring tank and stop watch. Vacuum gauge is fitted on suction line and Pressure gauge is fitted on delivery line to measure the pressure.

      Learning Objectives/Experiments
      :

      • To determine total head, pump output, overall efficiency and pump efficiency.
      • To plot Graph: Head vs Discharge Pump efficiency vs Discharge.

      Control Panel:

      • Digital RPM Indicator
      • Electronic Energy meter
      • Standard make On/Off switch, Mains Indicator etc.

      The scope of Delivery:
      • 1 Self Contained "Gear Pump Test Rig" Apparatus
      • 1 Instruction Manual consisting of experimental procedures, block diagram etc.

      Yes! I am Interested

      Submersible Pump Test Rig

      REQUEST CALLBACK

      Ask for Price

      Product Details:

      Flow MeasurementUsing Measuring Tank (Capacity 90 Ltrs.) & Electronic Stop Watch
      Tank MaterialStainless Steel
      MCBFor overload protection
      Energy measurementEnergy meter Electronic, L&T make.
      Bourdon typePressure Gauge
      Medium FlowClear Water
      Pump Capacity1 HP
      Floor Area Required1.5 m x 0.75 m
      Electricity SupplySingle Phase, 50 Hz, 5-15 amp
      Sump Tank Capacity120 Liters
      Voltage220 V AC

      We are offering a wide range of Submersible Pump Test Rig.

      Features:
      • The present Submersible Pump Test Rig is a self-contained unit operated on closed circuit basis containing a sump tank. The set-up consists of a Submersible Pump, which is mounted horizontally with sump tank. The flow of fluid is measured by using the measuring tank and stop watch.

      Learning Objectives/Experiments
      :
      • To determine total head, pump output, overall efficiency and pump efficiency of the submersible pump.
      • To plot Graph Head vs Discharge Pump efficiency vs Discharge Pump HP vs Discharge.
      • The whole set-up is ingeniously designed and schematically arranged on a powder-coated rigid structure


      Control Panel:

      • Energy meter Electronic
      • Standard make On/Off switch, Mains Indicator etc.


      Scope of Delivery:

      • 1 Self Contained " Submersible Pump Test Rig " Apparatus
      • 1 Instruction Manual consisting of experimental procedures, block diagram etc.

        Yes! I am Interested

        Hydraulic Ram Test Rig

        REQUEST CALLBACK

        Ask for Price

        Product Details:

        Water CirculationFHP Pump, Crompton make.
        Supply Head1.0 m
        Delivery Head4 m
        Flow MeasurementUsing Measuring Tank & Electronic Stop Watch for waste water and for useful water
        Air VesselSuitable Capacity
        Driven TypeElectric
        Power230 +/- 10 VAC, 50 Hz
        PhaseSingle
        Distilled Water Capacity250 Liters
        Bourdon TypePressure Gauge
        Overhead Tank Capacity50 Liters
        Sump Tank Capacity140 Liters.

        Owing to our expertise and the assistance of dedicated workforce, we have been able to offer optimum quality Hydraulic Ram Test Rig at an affordable market price. These products are precisely manufactured under strict supervision using best quality metal. Known for unmatched quality, high efficiency and hassle-free operations, these products are highly demanded among the industrial clients.

        Technical Description:

        Hydraulic Ram is used for pumping a small quantity of water at the high head when a large quantity of water at the small head is available. It operates on the principle that if flowing water is suddenly brought to rest in a long pipe, a phenomena known as water hammer occurs, wherein a pressure wave travels along the pipe. This principle is used in the Hydraulic Ram to pump water. The set-up consists of a box incorporating pulse and non-return valves and a supply reservoir on a stand which is fed by the overhead tank. An air vessel above the valve chamber smoothes cyclic fluctuations from the Ram delivery. Different pressure may be applied to the pulse valve to change the closing pressure and hence the operating characteristic.

        Learning Objectives/Experiments
        :
        • To find out discharge of useful water and waste water
        • To find out the efficiency of the Hydraulic ram

        Required for Operation:

        • Provide, single phase electric supply with proper earthing. (Neutral – Earth voltage less than 5 VAC.),
        • 5A, three pin socket with switch for pump.
        • Tap water connection ” BSP

        Control Panel:

        • Pressure Gauge
        • Standard make On/Off switch, Mains Indicator etc.

        Scope of Delivery:
        • Self Contained "Hydraulic Ram Test Rig" Apparatus
        • Instruction Manual consisting of experimental procedures, block diagram etc.

        Yes! I am Interested

        View PDF

        Centrifugal Pump Test Rig

        REQUEST CALLBACK

        Ask for Price

        Product Details:

        Floor Area required2 m x 1 m
        Vacuum GaugeBourdon type, Range: 0-760 mm of Hg
        Stop WatchElectronic
        Measuring Tank MaterialStainless Steel
        Sump Tank MaterialStainless Steel
        Electricity supplySingle Phase, 220 VAC, 50 Hz, 5-15 Amp
        Clear Water FlowMedium
        Pump TypeCentrifugal ,2800 RPM
        Driven SpeedVariable
        Pressure GaugeBourdon Type, Range0-4 kg/cm2
        Compound GaugeBourdon type, Range: -760 mm of Hg to 2 kg/cm2

        The present Centrifugal Pump Test Rig is a self-contained unit operated on closed circuit basis containing a sump tank. The set-up consists of two Centrifugal pumps. Both pumps are coupled with individual Motors. Speed Control facility is provided to vary the RPM of the motor. RPM Indicator with Proximity sensor indicates the RPM of Pump. Pipeline and valve arrangement provided enables the user to operate the test rig either in single pump operation, parallel mode or in series mode. The flow of water is measured by using measuring tank and stopwatch. Vacuum & Pressure gauges are fitted on suction line and delivery line of each pump to measure the pressure.

        Learning Objectives / Experiments:
        • The Centrifugal Pump Test Rig allows the students to understand the performance benefits of centrifugal Pumps in parallel & series mode as under:
        • Efficiency curves at various speed and heads.

        Control Panel:
        • RPM measurement: RPM Indicator with a Proximity sensor.
        • Energy measurement: L&T make electronic energy meter.
        • Standard make On/Off Switch, Mains Indicator, etc.

        Scope of Delivery:
        • 1 Self Contained "Centrifugal Pump Test Rig (Multi Stage, Variable Speed, Series & Parallel)' Apparatus.
        • 1 Instruction Manual consisting of experimental procedures, block diagram etc.

        Yes! I am Interested

        View PDF

        Centrifugal Pump Test Rig

        REQUEST CALLBACK

        Ask for Price

        Product Details:

        Spring BalanceDial type
        Electricity SupplySingle Phase, 220 V AC, 50 Hz, 5-15 amp
        Sump Tank Capacity110 Liters
        Stop watchElectronic
        Bourdon typePressure Gauge
        MCBFor overload protection
        RPM measurementDigital RPM Indicator with Proximity sensor
        Capacity1 HP
        Flow MeasurementUsing Measuring Tank with Piezometer
        Speed2800 RPM
        Clear Water FlowMedium
        Floor Area Required2 m x 1 m

        We are offering a wide range of Centrifugal Pump Test Rig.

        Technical Description:

        The present Centrifugal Pump Test Rig is a self-contained unit operated on closed circuit basis containing a sump tank. The set-up consists of a Centrifugal pump coupled with a swinging frame type DC Motor which permits direct torque measurement with the help of a spring balance. Power input to the DC Motor is varied by means of a Thyristor controlled DC Drive to vary the RPM of a motor. An RPM Indicator with Proximity sensor indicates the RPM of Pump. The flow of water is measured by using a measuring tank and stop watch. A vacuum gauge is fitted on suction line and a Pressure gauge is fitted on a delivery line to measure the pressure.Centrifugal Pump Test Rig is a self-contained unit operated on closed circuit basis containing a sump tank. The set-up consists of a Centrifugal pump coupled with a swinging frame type DC Motor which permits direct torque measurement with the help of a spring balance. Power input to the DC Motor is varied by means of a Thyristor controlled DC Drive to vary the RPM of a motor. An RPM Indicator with Proximity sensor indicates the RPM of Pump. The flow of water is measured by using the measuring tank and stop watch. A vacuum gauge is fitted on suction line and the Pressure gauge is fitted on the delivery line to measure the pressure.

        Learning Objectives/Experiments
        :
        • To determine total head, Pump Output, overall efficiency and pump efficiency of the centrifugal pump.
        • To plot Head vs Discharge, Pump efficiency vs Discharge, Pump Output vs Discharge.

        Scope of Delivery
        :
        • 1 Self Contained “CENTRIFUGAL PUMP TEST RIG (VARIABLE SPEED WITH SWINGING FIELD DYANOMETER)” Apparatus.
        • 1 Instruction Manual consisting of experimental procedures, block diagram etc.

        Yes! I am Interested

         





        X