Quality Engineers
Quality Engineers
Ambala Cantt, Ambala, Haryana
SEND SMS
SEND EMAIL

Mass Transfer Lab Apparatus

Pioneers in the industry, we offer solid liquid extraction packed bed type, rotary dryer, natural draft tray dryer, forced draft tray dryer, adsorption in packed bed and batch crystallizer from India.

Solid Liquid Extraction Packed Bed Type

Solid Liquid Extraction Packed Bed Type
  • Solid Liquid Extraction Packed Bed Type
Ask For Price
We are among the leading manufacturers, suppliers and exporters of Solid Liquid Extraction Packed Bed Type to our valuable customers. This apparatus is precisely designed from premium quality stainless steel, which is procured from well known vendors. The offered apparatus is commonly used for performing various solid liquid extractions that are used in different sample preparation in lab.

Technical Description: This setup is designed to study the performance characteristics of solvent extraction of a particular component from a packed bed of solid material. The apparatus allows study of such systems as water/inorganic salts, water/sugar bed, methylene chloride/vegetable oil etc. The glass column is fitted with SS mesh to support the solid material. The solvent is introduced near the bottom of the column and it flows upward counter-currently to the solids. A pump supplies the solvent and flow rate is monitored by means of a Rota meter. Solvent feed tank is kept in a bath fitted with heater and digital temperature controller is used to maintain the constant temperature

Learning Objectives/Experiments:  

  • To study the effect of various system parameters like, solvent temperature, solvent rate and particle size on the %age recovery of oil from solid.

Required for Operation:

  • Electricity Supply: 1 Phase, 220 V AC, 1.5 kW.
  • Solvent: 30ltrs.
  • Solid: 10kg
  • Table for setup support

Technical Specifications:

  • Extraction Column: Material Borosilicate Glass.
  • Solvent Flow Measurement: Rota meter.
  • Solvent Tank: Made of Stainless Steel, Capacity 30 Ltrs. Double wall.
  • Solvent circulation: Magnetic Pump made of Polypropylene to Circulate solvent.
  • Heater: Nichrome wire heater
  • Temperature Sensor: RTD PT-100 Type.
  • The whole set-up is ingeniously designed and schematically arranged on a powder-coated rigid structure.

Control Panel:

  • Standard make On/Off switch, Mains Indicator etc.
  • Digital Temp. Controller: 0-199.9°C (For Hot Water Bath)

Scope of Delivery:

  • 1 Self-contained “SOLID - LIQUID EXTRACTION (PACKED BED TYPE)” Apparatus
  • 1 Instruction Manual consisting of experimental procedures, block diagram etc.

 

Request
Callback


Additional Information:

  • Item Code: QMT-05
Yes! I am Interested
View PDF

Rotary Dryer

Rotary Dryer
  • Rotary Dryer
Ask For Price
Owing to the vast experience and knowledge of this field, we have been able to offer premium quality Rotary Dryer to our esteemed customers. Manufactured in compliance with the industry laid standards, this apparatus is commonly used for various drying purposes. The offered dryers are known for their hassle free operations and easy maintenance.

Technical Description: Rotary dryer is a unit in which drying is done by forced draft action created by hot air. The set-up consists of a long revolving cylindrical shell slightly inclined towards the outlet. The shell is fitted with two brackets for support. Air from a blower passes through a heating chamber serves the purpose of drying agent. An arrangement for rotating the dryer shell at low RPM is provided by means of an electrical motor and a reduction gearbox. Wet feed enters from one end of the cylinder and dry material discharges from the other end. As the shell rotates internal flights lift the solids and shower them down through the interior of the shell. This action increases the contact of wet solid against hot air making the dryer very effective. The flow of hot air is counter-current to solids. Flow control and by-pass valve are fitted to regulate the airflow.

Learning Objectives/Experiments:

  • To study the operation of a Rotary Dryer.
  • To study the drying characteristics of a solid material under batch drying condition in a rotary dryer.

Required for Operation:

  • Electricity Supply: 1 Phase, 220 V AC, 4 kW.
  • Wet Solid.
  • Floor space of 1.5m x 2m.
Technical Specifications:
  • Drying Shell: Material Stainless Steel, Length 1.5 m, Dia 110 mm.
  • Feed Hopper: Material Stainless Steel , Compatible Capacity
  • Product Receiver: Material Stainless Steel, Compatible Capacity.
  • Rotating Action: Using motor coupled with a Reduction Gear Box.
  • Hot Air Circulation: By forced draft fan, Arrangement is done to vary the air flow rate.
  • Heating Chamber: Compatible capacity
  • Heater: Nichrome wire heater
  • Temperature Sensors: RTD PT-100 type.
  • The whole set-up is ingeniously designed and schematically arranged on a powder-coated rigid structure.

Control Panel:

  • Standard make On/Off switch, Mains Indicator etc.
  • Digital Temp. Controller 0-199.9°C (For Hot Air).

Scope of Delivery:

  • 1 Self Contained "ROTARY DRYER" Apparatus.
  • 1 Instruction Manual consisting of experimental procedures, block diagram etc.

 

Request
Callback


Additional Information:

  • Item Code: QMT-18
Yes! I am Interested
View PDF

Natural Draft Tray Dryer

Natural Draft Tray Dryer
  • Natural Draft Tray Dryer
Ask For Price
Owing to the vast experience and knowledge of this field, we have been able to offer premium quality Natural Draft Tray Dryer to prestigious customers. These dryers are commonly used for analyzing the moisture elimination by various condition of high temperature under natural draft action. This draft action is generated by the hot stream of air.

Technical Description: Natural Draft Tray Dryer is a dryer in which moisture removal takes place by heat under natural condition. The set-up consists of an insulated Stainless Steel chamber fitted with heater. Inside the chamber a tray is attached directly to an electronic weighing balance, which is fitted on the bottom, outside the chamber. Material for drying is placed in the tray and regular loss of weight is monitored. Temperature controller fitted in the set-up maintains the required temperature in the chamber.

Learning Objectives/Experiments:

  • To study the drying characteristics of a solid material under batch drying condition.
  • Determination of drying rate and to plot moisture lost with time under for different operating conditions.

Required for Operation:

  • Electricity Supply: 1 Phase, 220 V AC, 2 kW.
  • Drying Solids.
  • Table for setup support

Technical Specifications:

  • Drying Chamber Material Size: Stainless Steel 30 x 30 x 30 cm insulated by Ceramic wool and housed in a MS Chamber.
  • Maximum Temperature: 120°C.
  • Heater: Nichrome wire heater
  • Weighing Balance: Digital, 0-1000gm. of ± 1 gm resolution.
  • Temperature Sensor: RTD PT-100 type

Control Panel:

  • Standard make On/Off switch, Mains Indicator etc.
  • Digital Temp. Controller 0-199.9°C for Drying Chamber.

Scope of Delivery:

  • 1 Self Contained “NATURAL DRAFT TRAY DRYER“Apparatus.
  • 1 Instruction Manual consisting of experimental procedures, block diagram etc.

    Request
    Callback


    Additional Information:

    • Item Code: QMT-16
    Yes! I am Interested
    View PDF

    Forced Draft Tray Dryer

    Forced Draft Tray Dryer
    • Forced Draft Tray Dryer
    Ask For Price
    Our organization holds expertise in offering premium quality Forced Draft Tray Dryer to our valuable customers. Manufactured as per the industry set standards, these forced draft tray dryers are widely used for the purpose of analyzing the rate of drying of wet sawdust. The offered analyzing is performed under a wide range of different temperature conditions.

    Technical Description:
    Forced Draft Tray Dryer is a dryer in which moisture removal takes place by means of forced draft action created by hot air. The set-up consists of an insulated double wall chamber. Inside the chamber a tray is attached directly to a electronic weighing balance, which is fitted on the bottom, outside the chamber. Material for drying is placed in the tray and regular loss of weight is monitored. Air from a blower passes through a heating chamber and is used as drying agent. Arrangement is done to vary the airflow rate.
    Learning Objectives/Experiments • To study the drying characteristics of a solid under forced draft condition and determine the critical moisture content.• To correlate the constant drying rate with air mass velocity. Required for Operation:• Electricity Supply: 1 Phase, 220 V AC, 2.5 kW.• Wet Solid.
    Technical Specifications• Drying Chamber : Insulated double wall chamber, Size (20 x 20 x 25) cm• Weighing Balance : Digital (0-1000gm) of ± 1 gm resolution.• Hot Air Circulation : By forced draft fan, Arrangement is done to vary the air flow rate.• Heating Chamber : Compatible capacity.
    Control Panel: • Digital Temp. Indicator : 0-199.9° C (with multi-channel switch) • Temperature Sensors : RTD PT – 100 Type • Standard make on/off switch, Mains Indicator etc.
    Scope of Delivery:• 1 Self-contained “Forced Draft Tray Dryer” Apparatus• 1 Instruction Manual consisting of experimental procedures, block diagram etc.
    Request
    Callback


    Additional Information:

    • Item Code: QMT-17
    Yes! I am Interested
    View PDF

    Adsorption in Packed Bed

    Adsorption in Packed Bed
    • Adsorption in Packed Bed
    Ask For Price
    Owing to the rich experience and knowledge of this field, we have been able to offer optimum quality Adsorption in Packed Bed to our valuable customers. The offered apparatus is commonly used for determining the process of adsorption in packed bed arrangement. Due to the hassle free installation and simple construction, these apparatus is highly demanded in the market.

    Technical Description: The set up consist of three vertical column packed with activated Charcoal. Columns are operated individually. Liquid feed with dye is fed to the individual column from the bottom and samples are collected from the top at regular interval of time. Rotameter is provided to measure the flow rate. Pump with a feed tank is provided for fluid flow.

    Learning Objectives/Experiments:

    • To obtain the breakthrough curve and hence length of unused bed for the given adsorption system.

    Required for Operation:

    • Electricity Supply : 1 Phase, 220 V AC, 0.5 kW
    • Bench Area: 1.2m x 1m.
    • Required Chemicals & Laboratory Glassware.
    • Colorimeter. Required analyzing equipments as per the system to study.

    Technical Specifications:

    • Column (3 Nos.): Material Borosilicate glass of different dia.
    • Feed tank: Material Stainless Steel, Capacity 20 litres.
    • Receiving tank: Material Stainless Steel, Capacity 20 litres.
    • Feed circulation: FHP, Magnetic Pump made of Polypropylene.
    • Piping: Stainless Steel and PVC of size ¼.
    • Flow measurement: Rotameter for feed.
    • Stop Watch: Electronic.

    Control Panel:

    • Standard make On/Off switch, Mains Indicator etc.

    Scope of Delivery:

    • 1 Self-contained “ADSORPTION IN PACKED BED” Apparatus
    • 1 Instruction Manual consisting of experimental procedures, block diagram etc.
    Request
    Callback


    Additional Information:

    • Item Code: QMT-26
    • Minimum Order Quantity: 1 Piece(s)
    Yes! I am Interested
    View PDF

    Batch Crystallizer

    Batch Crystallizer
    • Batch Crystallizer
    Ask For Price

    Technical Description: Crystallization is the formation of solid particles within a homogeneous phase of saturated liquid. Its wide use has a two-fold basis, a crystal formed from an impure solution is itself pure and crystallization affords a practical method of separating w. This operation involves both heat and mass transfer. Cooling type agitated batch crystallizer set up consists of an open jacketed stirred vessel provided with water heating & cooling arrangement. The feed is prepared in the crystallizer itself with hot water and stirrer. The hot saturated solution in the crystallizer is then cooled by circulation of cooling water and crystals are formed.

    Learning Objectives/Experiments:

    • To study the performance of a Batch Crystallizer.
    • To determine the crystal yield and the efficiency of crystallizer.

    Required for Operation:

    • Water Supply.
    • Drain.
    • Electricity Supply: 1 Phase, 220 V AC, 1.5 kW.
    • Required Chemicals

    Technical Specifications:

    • Crystallizer (Jacketed Type): Material Stainless Steel, Cap. 2Ltrs. with conical bottom.
    • Stirrer: FHP, Variable Speed.
    • Heater: Nichrome wire heater.
    • Cooling Water Tank: Material Stainless Steel , Capacity 30litre fitted with Pump.
    • Flow measurement: Rotameter for cooling water.
    • Pump: FHP.
    • Receiving Tank: Material Stainless Steel , Capacity 2litre with SS sieve.
    • Temperature Sensors: RTD PT-100 type.
    • The whole set-up is ingeniously designed and schematically arranged on a powder-coated rigid structure.

    Control Panel:

    • Standard make On/Off switch, Mains Indicator etc.
    • Digital Temp. Indicator 0-199.90C with multi-channel switch.

    Scope of Delivery:

    • 1 Self Contained"BATCH CRYSTALLIZER"Apparatus.
    • 1 Instruction Manual consisting of experimental procedures, block diagram etc.
      Request
      Callback


      Additional Information:

      • Item Code: QMT-20
      Yes! I am Interested
      View PDF

      Vapour In Air Diffusion Apparatus

      Vapour In Air Diffusion Apparatus
      • Vapour In Air Diffusion Apparatus
      Ask For Price

      Technical Description:
      Using a small sample of the liquid in a narrow vertical tube, and observing its rate of evaporation into stream of air passed across the top of the tube can conveniently be used to study the diffusion of vapour of a volatile liquid into air. The set up consists of a glass tube placed in a water bath. A horizontal glass tube is fixed to the upper end of the tube and air is drawn through this by a small air pump included within the unit. Air flows over this tube maintaining partial pressure difference. A Traveling microscope with sliding vernier scale is provided to measure the rate of fall of solvent within capillary. A stirrer is fitted to maintain constant temperature inside the bath.

      Learning Objectives/Experiments:  

      • Determination of the diffusion co-efficient of an organic vapour in air.
      • To study the effect of temperature on diffusion co-efficient.

      Required for Operation:

      • Electricity Supply: 1 Phase, 220 V AC, 0.6 kW.
      • Required Chemicals & Laboratory Glassware.
      • Table for setup support

       Technical Specifications:

      • Tube: Material Borosilicate Glass.
      • Water Bath: Material Stainless Steel with two sides made of glass Capacity 8Ltrs. fitted with heater and stirrer.
      • Heater: Nichrome Wire Heater.
      • Stirrer: Stainless Steel, Impeller and shaft coupled with FHP motor.
      • Air Circulation : Air Pump.
      • Traveling Microscope: 0-150 x 0.1 mm resolution.
      • Temperature Sensor: RTD PT-100 type.
      • The whole set-up is ingeniously designed and schematically arranged on a powder-coated rigid structure

       Control Panel:

      • Standard make On/Off switch, Mains Indicator etc.
      • Digital Temp. Controller cum-Indicator For Water Bath 0-199.9°C

      Scope of Delivery:

      • 1 Self-contained “VAPOUR IN AIR DIFFUSION” Apparatus
      • 1 Instruction Manual consisting of experimental procedures, block diagram etc.

       

       

        Request
        Callback


        Additional Information:

        • Item Code: QMT-14
        Yes! I am Interested
        View PDF

        Simple Batch Distillation Set-Up

        Simple Batch Distillation Set-Up
        • Simple Batch Distillation Set-Up
        Ask For Price

        Technical Description: The equipment consists of a distillation still made of stainless steel. The feed in the still is heated externally by heater. The vapours form the top of the vessel is condensed in the type condenser by circulating cooling water. Temperature of the feed mixture is controlled by means of a digital temperature Controller. The condensate is collected in a receiver made of stainless steel.

        Learning Objectives/Experiments:  

        • To study the characteristics of Simple Distillation.
        • To verify of Reyleigh’s Equation.

        Required for Operation:

        • Electricity Supply: 1 Phase, 220 V AC, 2 kW.
        • Water Supply : Continuous @ 4 LPM at 1 Bar
        • Floor Drain.
        • Required Chemicals.

        Technical Specifications:

          • Flow measurement

          :

          Rotameter for cold water for condenser

          • Distillation still

          :

          Made of Stainless Steel, capacity 5ltrs. Insulated with ceramic wool

           

           

          And cladding with Aluminum foil.

          • Condenser

          :

          Concentric Tube type made of Stainless Steel

          • Distillate tank

          :

          Made of Stainless Steel, capacity 2 Ltrs.

          • Heater

          :

          Nichrome wire heater.

        The whole set-up is ingeniously designed and schematically arranged on a powder-coated rigid structure.

        Control Panel:

        • Standard make On/Off switch, Mains Indicator etc.
        • Digital Temp. Controller 0-199.9°C, RTD PT-100 type (For Steam Generator).
        • Digital Temp. Indicator 0-199.90C with multi-channel switch.

         

        Scope of Delivery: 

        • 1 Self Contained"SIMPLE BATCH DISTILLATION"Apparatus. 
        • 1 Instruction Manual consisting of experimental procedures, block diagram etc. 
        Request
        Callback


        Additional Information:

        • Item Code: QMT-10
        Yes! I am Interested
        View PDF

        Mass Transfer with & without Chemical Reaction

        Mass Transfer with & without Chemical Reaction
        • Mass Transfer with & without Chemical Reaction
        Ask For Price

        The setup consists of a Reactor, in which solid cylinder of Benzoic Acid is placed and is stirred by means of a variable speed mixer. Baffles are also provided. The Reactor is made of Stainless Steel. Peltilizer is provided to make the solid cylinder of Benzoic Acid. Constant temperature water bath arrangement is provided to conduct the experiment at various temperatures.

        EXPERIMENTATION:

        Dissolution of Benzoic acid in water: Kinetic studies

        Dissolution of Benzoic acid with reaction in aqueous NaOH solution.

        UTILITIES REQUIRED :

        Water Supply.

        Drain.

        Electricity Supply: 1 Phase, 220 V AC, 0.5 kW.

        Instruments, Laboratory Glassware and Chemicals required for analysis as per the system adopted.

        TECHNICAL DETAILS :

        • Reactor : Material Stainless Steel, Capacity 2 Ltrs. (approx)
        • Water Bath : Material Stainless Steel, Double Wall,nsulated with ceramic fibre wool.
        • Heater : Nichrome Wire Heater
        • Stirrer : Stainless Steel Impeller and shaft coupled with DC motor drive for variable speed.
        • Temperature Sensors : RTD PT-100 type. Control panel comprises of :
        • RPM Indicator : Digital, Non contact type. Digital Temp. Controller : 0-199.90C for hot water tank. With Standard make on/off switch, Mains Indicator & fuse etc.
        • Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus
        • The setup is provided with Peltilizer.
        • The whole unit is assembled rigidly on a base plate.
        • The whole setup is well designed and arrangement in a good quality painted structure.
        Request
        Callback


        Additional Information:

        • Item Code: QMT-24
        Yes! I am Interested

        Vapour- Liquid Equilibrium Set- Up

        Vapour- Liquid Equilibrium Set- Up
        • Vapour- Liquid Equilibrium Set- Up
        Ask For Price

        “Vapour-Liquid Equilibrium Set-Up” Apparatus

        Technical Description: The basic data of any distillation problem are the equilibrium between the liquid and vapours phases of the system subjected to distillation. Hence is of great importance to study the vapour liquid equilibrium. The set-up consists of distillation still with a heating element. An electrical Dimmer stat is connected to heating element for varying heat input. The vapours form the top of column is condensed in the shell and tube type condenser by circulating cooling water. The condensate is collected in reflux drum and feedback to column as reflux. A tank with pump is provided to circulate cold water to condenser. Flow rates can be regulated through control valve fitted. Instrumentation is provided to measure the temperatures at different points

        Learning Objectives/Experiments:  

        • To determine the vapour Liquid Equilibrium curve for CCl4 and Toluene or any other mixture.

        Required for Operation:

        • Water Supply.
        • Drain.
        • Electricity Supply: 1 Phase, 220 V AC, 1.5 kW.
        • Refractrometer for Analysis.
        • Required Chemicals

        Technical Specifications: 

        • Distillation still: Made of Stainless Steel Capacity 1Ltrs. Insulated by ceramic wool.
        • Condenser: Concentric Tube type.
        • Heater : Nichrome wire
        • Cooling Water Tank: Material Stainless Steel, Capacity 15Ltrs. (Approx.).
        • Cold Water circulation: Using FHP Pump.
        • Temperature Sensors : RTD PT-100 type
        • The whole set-up is ingeniously designed and schematically arranged on a powder-coated rigid structure.

        Control Panel:

        • Standard make On/Off switch, Mains Indicator etc.
        • Digital Voltmeter: 0-300 Volt.
        • Dimmer stat: 0-230 V, 2A.
        • Digital Temp. Indicator: 0-199.90C RTD PT-100 Type.

        Scope of Delivery:

        • 1 Self-contained “Vapour-Liquid Equilibrium Set-Up” Apparatus
        • 1 Instruction Manual consisting of experimental procedures, block diagram etc.
        Request
        Callback


        Additional Information:

        • Item Code: QMT-23
        Yes! I am Interested
        View PDF

        Wetted Wall Column

        Wetted Wall Column
        • Wetted Wall Column
        Ask For Price

        DESCRIPTION :

        The set up consists of a glass column. Water is fed at the top of the column along the walls to make the column a wetted wall column. Hot air from heating chamber with known humidity is allowed to pass through the column vertically upward and evaporation in the liquid film around the wall takes place. The flow rates of water and air can be independently varied to simulate different conditions. Instrumentation is provided to measure the dry and wet bulb temperatures at air inlet and outlet.

        EXPERIMENTATION:

        • To determine the gas film coefficient in a wetted wall column using air-water
        • system.
        • To find the mass transfer coefficient

        UTILITIES REQUIRED :

        • Compressed Air Supply at 2 Bar, 4 CFM.
        • Water supply.
        • Drain.
        • Electricity Supply : 1 Phase, 220 V AC, 0.5 kW.

        TECHNICAL DETAILS :

        • Column : Borosilicate Glass Dia 45 mm, Length 1000 mm (approx.)
        • Water Circulation : FHP Pump.
        • Water Tank : Material Stainless Steel, Capacity 20 Ltrs.
        • Heating Chamber : Compatible capacity.
        • Heater : Nichrome wire heater
        • Rotameter : For water flow rate measurement.
        • Dry & wet Bulb Temp. : With Digital Temperature Indicator.
        • Temperature Sensors : RTD PT-100 Type.
        • Control panel comprises of :
        • Digital Temp. Indicator : 0-199.90C, RTD PT-100 type with multi-channel switch. Standard make on/off switch, Mains Indicator etc.
        • Instruction Manual : An ENGLISH instruction manual will be provided along
        • with the Apparatus
        • The whole set-up is well designed and arranged in a good quality painted structure.
        Request
        Callback


        Additional Information:

        • Item Code: QMT-22
        Yes! I am Interested

        Sieve Plate Distillation Column

        Sieve Plate Distillation Column
        • Sieve Plate Distillation Column
        Ask For Price

        Technical Description: Column is made of Stainless Steel material with seven sieve trays. An electrically heated re-boiler is installed at the bottom of the column. The bottom product is collected in the tank. The vapours form the top of column are condensed in the shell and tube type condenser by cooling water supplied by laboratory overhead tank. The condensate is divided into reflux and distillate by automatic reflux divider and R/D Ratio can be varied. Reflux is fed back to the column and distillate is received in a receiving tank. The complete column is insulated for minimizing the heat loss. Instrumentation is provided for pressure & temperature measurement wherever necessary

        Learning Objectives/Experiments:

        • To estimate the batch curves for a binary system and verify the binary distillation equation for a known number of theoretical plates.
        • To operate the column under total reflux condition and estimate the minimum number of theoretical plates required.

        Required for Operation:

        • Water Supply 2 LPM at 5m head.
        • Drain.
        • Electricity Supply: 1 Phase, 220 V AC, 6 kW.
        • Required Chemicals.
        • Refractrometer for analysis

        Technical Specifications:

        • Distillation Column: Material Stainless Steel, Dia 110mm, seven sieve trays.
        • Pressure Gauge: Bourdon type, 0-2 kg/cm2.
        • Rotameter: For cooling water flow rate measurement.
        • Steam Generator: Made of Stainless Steel, provided with Pressure Gauge & Level Indicator, Safety valve & insulated with ceramic wool and cladding with Aluminium foil.
        • Reflux Divider: Special arrangement to change R/D ratio automatically.
        • Condenser: Shell & Tube type made of Stainless Steel.
        • Bottom Product Tank: Made of Stainless Steel, capacity 5Ltrs.
        • Distillate Tank : Made of Stainless Steel, capacity 5Ltrs.
        • Heaters: Nichrome wire heater.
        • Temperature Sensors: RTD PT-100 type.

        Control Panel:

        • Standard make On/Off switch, Mains Indicator etc.
        • Digital Temp. Controller 0-199.9°C for Drying Chamber.
        • Digital Temp. Indicator 0-199.90C, (with multi-channel switch).

        Scope of Delivery:

        • 1 Self Contained “SIEVE PLATE DISTILLATION COLUMN“Apparatus.
        • 1 Instruction Manual consisting of experimental procedures, block diagram etc.
          Request
          Callback


          Additional Information:

          • Item Code: QMT-07
          Yes! I am Interested
          View PDF

          Fluidized Bed Dryer

          Fluidized Bed Dryer
          • Fluidized Bed Dryer
          Ask For Price

          “Fluidized Bed Dryer” Apparatus

          Technical Description: This is a dryer in which moisture removal takes place by fluidization of solids particles by hot air. The set-up fitted with a specially designed, vertical Glass Column. The lower portion of the column is filled with fluidizing material. The material is supported on the screen mesh held between two flanges. Air from a compressor is heated in the heater box and passed through the column. Flow control and by-pass valve are fitted to regulate the airflow. At the top outlet of column a cyclone is provided to collect any solid particles taken out by the air stream.

          Learning Objectives/Experiments:

          • To study the fluidized bed drying
          • To plot the drying curve under fluidized bed condition
          Required for Operation:
          • Electricity Supply: 1 Phase, 220 V AC, 3 kW.
          • Granular and free flowing solid of size 1 to 2 mm

          Technical Specifications:

          • Column: Material Borosilicate Glass Dia. 80 mm. Total Length 500mm.
          • Cyclone Separator: Material Stainless Steel, Compatible Capacity with collector.
          • Air Circulation : By forced draft fan, Arrangement is done to vary the air flow rate.
          • Heating Chamber: Compatible capacity
          • Heater: Nichrome wire heater
          • Temperature Sensors: RTD PT-100 type.
          • The whole set-up is ingeniously designed and schematically arranged on a powder-coated rigid structure.

          Control Panel:

          • Standard make On/Off switch, Mains Indicator etc.
          • Digital Temp. Controller 0 199.9°C

          Scope of Delivery:

          • 1 Self Contained "FLUIDIZED BED DRYER" Apparatus.
          • 1 Instruction Manual consisting of experimental procedures, block diagram etc.

          Request
          Callback


          Additional Information:

          • Item Code: QMT-19
          Yes! I am Interested
          View PDF

          Liquid Liquid Extraction in Packed Tower

          Liquid Liquid Extraction in Packed Tower
          • Liquid Liquid Extraction in Packed Tower
          Ask For Price

          The set-up consists of a glass column packed with Rasching rings. Continuous counter current contacts between the solvent and solute phases is made, which results into extract and raffinate streams. Flow meters (Rotameters) are used to note the flow of solvent & solute respectively. The continuous and dispersed phase streams are metered and derived from separate containers. The total set-up is housed in a well-designed rigid structure. The structure also supports tanks, piping, Rotameters, panel and other units.

          EXPERIMENTATION:

          ØØ To determine overall mass transfer co-efficient based on continuous & dispersed phase.

          ØØ To determine individual “Height of Transfer Unit” based on continuous & dispersed phase. 

          UTILITIES REQUIRED :

          • ØØ Compressed Air Supply at 2 Bar, 0.5 CFM.
          • ØØ Water Supply
          • ØØ Drain.
          • ØØ Required Chemicals & Laboratory Glassware.

          TECHNICAL DETAILS :

          • qq Extraction Column : Material Borosilicate Glass, ia 55 mm, Height 750 mm (approx).
          • qq Packing : Rasching Rings, Material Borosilicate Glass,
          • qq Feed Tanks : Material Stainless Steel, Cap. 20 Ltrs. (2 Nos.)
          • qq Extract & Raffinate Tanks : Material Stainless Steel, Cap 10 Ltrs.
          • qq Feed Circulation : By Compressed Air.
          • qq Pressure Regulator : 0-2 kg/cm2.
          • qq Pressure Gauge : Bourdon type, 0-2 kg/cm2.
          • qq Flow Measurement : Rotameters (One each for solvent & solute)
          • qq Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus
          • qq Special arrangement for changing height of interface zone is done.
          • qq The whole set-up is well designed and arranged in a good quality painted structure.

           

          Request
          Callback


          Additional Information:

          • Item Code: QMT-01
          Yes! I am Interested

          Bubble Cap Distillation Column

          Bubble Cap Distillation Column
          • Bubble Cap Distillation Column
          Ask For Price

          Technical Description: The column is made of Stainless Steel with seven plates for mounting the bubble caps. Each plate is provided with one bubble cap. An electrically heated reboiler is installed at the bottom of the column. The bottom product is collected in the tank. The vapours form the top of column are condensed in the shell and tube type condenser by cooling water supplied by laboratory overhead tank. The condensate is divided into reflux and distillate by automatic reflux divider and R/D Ratio can be varied. Reflux is fed back to the column and distillate is received in a receiving tank. The complete column is insulated for minimizing the heat loss. Instrumentation provided for pressure & temperature measurement wherever necessary.

          Learning Objectives/Experiments:

          • To estimate the batch distillation curves for a binary system and verify the binary batch distillation equation for a known number of theoretical plates.
          • To operate the column under total reflux condition and estimate the minimum number of theoretical plates required.

          Required for Operation:

          • Water Supply 2 LPM at 5 m head.
          • Drain.
          • Electricity Supply: 1 Phase, 220 V AC, 6 kW
          • Required Chemicals.
          • Refractometer for analysis

          Technical Specifications:

          • Distillation Column: Material Stainless Steel, Dia 110mm, seven plates.
          • Pressure Gauge: Bourdon type
          • Rotameter: For cooling water flow rate measurement. Indicator, Safety valve
          • Steam Generator: Made of Stainless Steel, provided with Pressure Gauge & Level% Insulated with ceramic wool and Cladding with Aluminum foil.
          • Reflux Divider: Special arrangement to change R/D ratio automatically.
          • Condenser: Shell & Tube type made of Stainless Steel.
          • Bottom product tank: Made of Stainless Steel, capacity 5 Ltrs.
          • Distillate tank: Made of Stainless Steel, capacity 5 Ltrs.
          • Heater: Nichrome wire heater.
          • Temp. Sensors: RTD PT-100 type

          Control Panel:

          • Standard make On/Off switch, Mains Indicator etc.
          • 0-199.9°C, For Reboiler.
          • 0-199.9oC, with multi-channel switch

           

          Scope of Delivery:

          • 1 Self-contained “BUBBLES CAP DISTILLATION COLUMN” Apparatus
          • 1 Instruction Manual consisting of experimental procedures, block diagram etc.

           

          Request
          Callback


          Additional Information:

          • Item Code: QMT-06
          Yes! I am Interested
          View PDF

          Absorption in Wetted Wall Column

          Absorption in Wetted Wall Column
          • Absorption in Wetted Wall Column
          Ask For Price
          We are indulged in offering Absorption Wetted Wall Column to our clients. In compliance with set industry norms, our supervisors manufacture and design this product using supreme class material. It is corrosion resistant and gives optimum performance. It also has high strength and extended durability that makes the product super-efficient. Proper quality test is performed so as to ensure the performance of this product before dispatching.

          Technical Description: The set up consists of a glass column. Alkaline liquid is fed at the top of the column along the walls to create a laminar liquid flow along the walls of a wetted wall column. Flow rates of Air and Co2, are measured separately, mixed in a mixing chamber and then passed through the column vertically upward and absorbed in liquid film around the wall. All the flow rates can be independently varied to simulate different conditions. Liquid Sample can be taken out from the sampling point at the bottom of the column for analysis. 

          Learning Objectives/Experiments:

           

          • To determine the number of transfer units, Height of transfer unit and overall mass transfer co-efficient for the given system.

          Required for Operation:

          • Compressed Air Supply at 2 Bar, 4 CFM.
          • Water Supply
          • Floor Drain.
          • CO2 cylinder with control valve, pressure regulator and Pressure gauges
          • Required Chemicals & Laboratory Glassware.

          Technical Specifications:

          • Column: Borosilicate Glass Dia 45 mm, Height 1000 mm (approx.)
          • Feed Circulation: By compressed air.
          • Pressure Regulator: 0-2 kg/cm².
          • Pressure Gauge: Bourdon type
          • Feed Tank: Material Stainless Steel, Capacity 20 Ltrs.
          • Flow measurement: Rotameters (One each for feed, air & CO2).
          • Collecting Tank: Material Stainless Steel, Capacity 10 Ltrs.
          • The whole set-up is ingeniously designed and schematically arranged on a powder-coated rigid structure. 

          Control Panel:

          • Standard make On/Off switch, Mains Indicator etc.

          Scope of Delivery:

          • 1 Self-contained “ABSORPTION IN WETTED WALL COLUMN Apparatus
          • 1 Instruction Manual consisting of experimental procedures, block diagram etc.
          Request
          Callback


          Additional Information:

          • Item Code: QMT-13
          Yes! I am Interested
          View PDF

          Experimental Water Cooling Tower

          Experimental Water Cooling Tower
          • Experimental Water Cooling Tower
          Ask For Price

          Technical Description: Experimental water-cooling tower is a forced draft counter flow type cooling tower specially designed for the Engineering students to provide them insight about actual working of tower. In this system, air from a fan enters at the bottom of the tower and after passing through the mesh packing, discharges into the atmosphere via a duct. Airflow is controlled by a butterfly valve on the blower's delivery line. Water is evenly distributed over the packing by nozzles at top of the tower. Water flow and temperatures can be measured and controlled with suitable instrumentation provided. A water tank at the bottom fitted with level gauge enables to show the exact evaporation loss. Front side acrylic sheet provides actual visualization of cooling tower operation. Air and water flow rates as well as inlet water temperatures can be varied to have different sets of readings.

          Learning Objectives/Experiments:

          • Actual visualization of the cooling tower operation.
          • To determine the mass transfer coefficient

          Required for Operation:

          • Water Supply & Drain.
          • Electricity Supply : 1 Phase, 220 V AC, 3 kW.
          • Floor area of 1.2 m x 1m

          Technical Specifications:

          • Tower: Material Stainless Steel Size-Cross-Section 150x 150mm,Height 750mm
          • Packing: Expanded wire mesh.
          • Air Circulation : By forced draft fan, arrangement is done to vary the air flow rate.
          • Air Flow Measurement: Orifice meter with U-tube manometer.
          • Flow Measurement: Rotameter.
          • Dry & Wet Bulb Temperature: Measured by Temperature Sensors insulated with ceramic fibre wool.
          • Hot Water Tank: Material Stainless Steel, Double wall,
          • Hot water circulation: Magnetic Pump
          • Heater: Nichrome wire heater
          • Temperature sensors : RTD PT-100 type 6 Nos.
          • The whole set-up is ingeniously designed and schematically arranged on a powder-coated rigid structure.

          Control Panel:

          • Standard make On/Off switch, Mains Indicator etc.
          • 0-2000C, for hot water tank.
          • 0-199.90C, with multi-channel switch

          Scope of Delivery:

          • 1 Self-contained “EXPERIMENTAL WATER COOLING TOWER” Apparatus
          • 1 Instruction Manual consisting of experimental procedures, block diagram etc.

          Request
          Callback


          Additional Information:

          • Item Code: QMT-25
          Yes! I am Interested
          View PDF

          Packed Bed Distillation Column

          Packed Bed Distillation Column
          • Packed Bed Distillation Column
          Ask For Price

          Technical Description: The column is made of Stainless Steel material packed with Borosilicate Glass rasching rings. An electrically heated re-boiler is installed at the bottom of the column. The bottom product is collected in the tank. The vapours form the top of column are condensed in the shell and tube type condenser by circulating cooling water, supplied by laboratory overhead tank. The condensate is divided into reflux and distillate by automatic reflux divider and R/D Ratio can be varied. Reflux is fed back to the column and distillate is received in a receiving tank. The complete column is insulated for minimizing the heat loss. Instrumentation is provided for pressure & temperature measurement wherever necessary.

          Learning Objectives/Experiments:

          • To estimate the batch distillation curves for a binary system and verify the binary batch distillation equation for a known packed height.
          • To operate the column under total reflux condition and estimate the HETP for the packing.

          Required for Operation:

          • Water Supply 2 LPM at 5 m head.
          • Electricity Supply: 1 Phase, 220 V AC, 6.5 kW.
          • Required Chemicals.
          • Refractometer for analysis.

          Technical Specifications:

          • Distillation Column: Material Stainless Steel, Dia 80mm, Length 900mm (approx).
          • Packing Material: Borosilicate Glass Rasching Rings.
          • Pressure Gauge: Bourdon type
          • Rotameter: For cooling water flow rate measurement.
          • Steam Generator: Made of Stainless Steel, provided with Pressure Gauge Level Indicator, Safety Valve & insulated with ceramic wool and Cladding with Aluminum foil.
          • Reflux Divider: Special arrangement to change R/D ratio automatically.
          • Condenser: Shell & Tube type made of Stainless Steel.
          • Distillate tank: Made of Stainless Steel, capacity 5Ltrs.
          • Heaters: Made of Stainless Steel, capacity 5Ltrs. Nichrome wire heater.
          • Temperature Sensors: RTD PT-100 type
          • The whole set-up is ingeniously designed and schematically arranged on a powder-coated rigid structure.

          Control Panel:

          • Standard make On/Off switch, Mains Indicator etc.
          • Digital Temp. Controller 0-199.9°C, For Re-boiler.
          • Digital Temp. Indicator 0-199.9oC, with multi-channel switch.

          Scope of Delivery:

          • 1 Self-contained “PACKED BED DISTILLATION COLUMN” Apparatus
          • 1 Instruction Manual consisting of experimental procedures, block diagram etc.
          Request
          Callback


          Additional Information:

          • Item Code: QMT-08
          Yes! I am Interested
          View PDF

          Solid In Air Diffusion Apparatus

          Solid In Air Diffusion Apparatus
          • Solid In Air Diffusion Apparatus
          Ask For Price
          Technical Description: Confirming a packed bed of spherical balls of a solid in a vertical tube, and observing its rate of diffusion into stream of air passed across the top of the tube can conveniently study the diffusion of solid into air. The equipment is fitted with a vertical glass column with a mesh near the base of column to hold the spherical balls. Spherical balls of known weight and diameter are filled in the column to make a packed bed. Air is allowed to pass through the silica gel chamber. From the bottom of the column, dry air is allowed to enter in the packed bed.

          Learning Objectives/Experiments:

          • To calculate the mass transfer co-efficient of vaporization of naphthalene in air using a packed bed of spherical particles of naphthalene.
          • To plot Sh/Sc 1/3 Vs Re on log 45g graph and determine the functional relationship.

          Required for Operation:

          • Compressed Air Supply at 2 Bar, 4 CFM.
          • Weighing Balance 0.01 gm resolution.
          • Solid Spherical Balls of Naphthalene
          • Table for setup support

          Technical Specifications:

          • Diffusion Column : Material Borosilicate Glass
          • Air flow Measurement: By Rota meter.
          • The whole set-up is ingeniously designed and schematically arranged on a powder-coated rigid structure.

          Control Panel:

          Standard make On/Off switch, Mains Indicator etc.

          Scope of Delivery:

          • 1 Self-contained “SOLID IN AIR DIFFUSION APPARATUS Apparatus
          • 1 Instruction Manual consisting of experimental procedures, block diagram etc.
          Request
          Callback


          Additional Information:

          • Item Code: QMT-15
          Yes! I am Interested
          View PDF

          Spray Tower

          Spray Tower
          • Spray Tower
          Ask For Price

          Technical Description: The experimental set-up of Spray Tower consists of a glass column provided with necessary accessories. It operates on a semi-batch mode. Fine spray nozzle is fitted at the top. Feeds are metered by Rotameters and derived from separate feed tanks. The liquid-liquid interface can be maintained by controlling the flow rate of extract with the help of needle valve provided on Rotameter. Total set-up is housed in a rigid structure. The structure also supports tanks, piping, Rotameters and other unit.

          Learning Objectives/Experiments:

          • To study the effect of the dispersed phase flow rate on overall volumetric mass transfer coefficient.
          • Dispersed phase hold-up study.

          Required for Operation:

          • Compressed Air Supply at 2 Bar, 0.5 CFM.
          • Drain.
          • Required Chemicals & Laboratory Glassware.

          Technical Specifications:

          • Extraction Column: Material Borosilicate Glass, {Diameter 45 mm, Height 750mm} (approx).
          • Feed Tank: Material Stainless Steel, Capacity 20 Ltrs., Quantity 2 Nos.
          • Extract & Raffinate Tanks: Material Stainless Steel, Capacity 10 Ltrs., Quantity 2 Nos.
          • Feed Circulation: By Compressed Air
          • Pressure Regulator: 0-2 kg/cm².
          • Pressure Gauge: Bourdon type, 0-2 kg/cm2.
          • Flow Measurement: Rotameters (One each for Solvent & Solute)
          • Special arrangement for changing height of interface zone is done.
          • The whole set-up is ingeniously designed and schematically arranged on a powder-coated rigid structure.

          Control Panel:

          • Standard make On/Off switch, Mains Indicator etc.

          Scope of Delivery:

          • 1 Self-contained “SPRAY TOWER” Apparatus
          • 1 Instruction Manual consisting of experimental procedures, block diagram etc
          Request
          Callback


          Additional Information:

          • Item Code: QMT-03
          Yes! I am Interested
          View PDF

          Absorption In Packed Bed Apparatus

          Absorption In Packed Bed Apparatus
          • Absorption In Packed Bed Apparatus
          Ask For Price

          Technical Description: The set up consists of a glass column packed with Reaching rings. Liquid is fed at the top of the column through distributor. The solute gas and air are measured separately, mixed in a mixing chamber and then passed through the packed column vertically upward and absorbed in liquid. All the flow rates can be independently varied to simulate different conditions. Liquid sample can be taken out from the sampling point at the bottom of the column for analysis.

          Learning Objectives/Experiments:

          • To determine the number of transfer units, Height of transfer unit and overall mass transfer co-efficient for the given system.

          Required for Operation:

          • Compressed Air Supply at 2 Bar, 4 CFM.
          • Water Supply.
          • Floor Drain.
          • CO2 cylinder with control valve, pressure regulator and Pressure gauges.
          • Required Chemicals & Laboratory Glassware.

          Technical Specifications:

          • Column : Borosilicate Glass Dia. 55 mm, Length 750mm (approx.)
          • Packing : Borosilicate Glass Reaching Ring
          • Feed Circulation: By compressed air.
          • Pressure Regulator: 0-2 kg/cm².
          • Pressure Gauge : Bourdon type
          • Feed Tank: Material Stainless Steel, Capacity 20 Ltrs.
          • Flow measurement: Rota meters (One each for feed, air & CO2).
          • Collecting Tank: Material Stainless Steel, Capacity 10 Ltrs.
          • The whole set-up is ingeniously designed and schematically arranged on a powder-coated rigid structure.

          Control Panel:

          • Standard make On/Off switch, Mains Indicator etc.

          Scope of Delivery:

          • 1 Self-contained “ABSORPTION IN PACKED BED Apparatus
          • 1 Instruction Manual consisting of experimental procedures, block diagram etc.
          Request
          Callback


          Additional Information:

          • Item Code: QMT-12
          Yes! I am Interested

          Absorption In Sieve Plate Column Apparatus

          Absorption In Sieve Plate Column Apparatus
          • Absorption In Sieve Plate Column Apparatus
          Ask For Price

          Technical Description: The set up consists of a column fitted with perforated plates. Liquid is fed at the top of the column through distributor. The solute gas and air are measured separately, mixed in a mixing chamber and then passed through the perforated plates vertically upward and absorbed in liquid. All the flow rates can be independently varied to simulate different conditions. Liquid Sample can be taken out from the bottom of the column for analysis.

           

          Learning Objectives/Experiments: 

          • To study absorption of CO2 in aqueous NaOH solution in a sieve plate column.
          • To determine the gas phase mass transfer co-efficient, KG.

          Required for Operation:

          • Compressed Air Supply at 2 Bar, 4 CFM.
          • Water Supply
          • Floor Drain.
          • CO2 cylinder with control valve, pressure regulator and Pressure gauges
          • Required Chemicals & Laboratory Glassware.

           

          Technical Specifications:

          • Column: Material Stainless Steel. Dia 80mm, Length 1000mm (approx). One section of column is provided of Borosilicate glass to visualize the process
          • Plates: Perforated Plates made of Stainless Steel (7 Nos.)
          • Feed Circulation: By compressed air.
          • Pressure Regulator: 0-2 kg/cm².
          • Pressure Gauge: Bourdon type
          • Feed Tank: Material Stainless Steel, Capacity 20Ltrs.
          • Flow Measurement: Rotameters (One each for feed, air & CO2).
          • Collecting Tank: Material Stainless Steel, Capacity 10 Ltrs.
          • The whole set-up is ingeniously designed and schematically arranged on a powder-coated rigid structure.

           

          Control Panel:

          • Standard make On/Off switch, Mains Indicator etc.

          Scope of Delivery:

          • 1 Self-contained “ABSORPTION IN SIEVE PLATE COLUMN Apparatus
          • 1 Instruction Manual consisting of experimental procedures, block diagram etc.
          Request
          Callback


          Additional Information:

          • Item Code: QMT-11
          Yes! I am Interested
          View PDF

          York Scheibel's Column Apparatus

          York Scheibel's Column Apparatus
          • York Scheibel's Column Apparatus
          Ask For Price
          Technical Description: The York Scheibel's Column falls in the class of gravity-operated extractors with mechanical agitation. The presence of alternatively agitating and calming sections in a York Scheibel's column yield higher extraction efficiency than the conventional packed column. In the setup a continuous counter current contact between the solvent and solute phases is made which results into extract and raffinate streams. Flow meters (Rotameter) are used to note the flow of solvent and solute respectively. The continuous and dispersed face streams are metered and derived from separate containers. Each stage consists of a woven wire mesh section and a mixing section. The propeller speed can be controlled to the desired value by a controller. Total set-up is housed in a well-designed rigid structure. The structure also supports tanks, piping, Rotameter, panel and other units.

          Learning Objectives/Experiments
          • To determine overall mass transfer co-efficient based on continuous & dispersed phase.
          • To determine individual `Height of Transfer Unit' based on continuous & dispersed phase.

          Required for Operation:
          • Compressed Air Supply at 2 Bar, 0.5 CFM.
          • Water Supply
          • Floor Drain.
          • Electricity Supply: 1 Phase, 220 V AC, 0.5 kW.
          • Required Chemicals & Laboratory Glassware.

          Technical Specifications:
          • Extraction Column : Material Borosilicate Glass Dia. 45 mm, Height 750 mm (approx).
          • Packing : Woven mesh of Stainless Steel
          • Agitator : Stainless Steel impellers with Stainless Steel shaft coupled to a Variable Speed DC Motor.
          • RPM Measurement : Digital RPM Indicator, non contact type with proximity sensor.
          • Feed Tank (2 Nos). : Material Stainless Steel, Capacity 20 Ltrs.
          • Extract & Raffinate Tanks : Material Stainless Steel, Capacity 10 Ltrs.
          • Feed Circulation : By Compressed Air
          • Pressure Regulator : 0-2 kg/cm².
          • Pressure Gauge : Bourdon type, 0-2 kg/cm2.
          • Flow Measurement : Rotameters (One each for solvent & solute)
          • Special arrangement for changing height of interface zone is done.

          Control Panel:
          • Digital RPM Indicator, non contact type with proximity sensor
          • Standard make on/off switch, Mains Indicator etc.

          Scope of Delivery:
          • 1 Self-contained “York Scheibel's Column” Apparatus
          • 1 Instruction Manual consisting of experimental procedures, block diagram etc.

          *Photograph is only for reference, final product may vary from it.
          Request
          Callback
          Yes! I am Interested
          View PDF

          Ion Exchange Apparatus

          Ion Exchange Apparatus
          • Ion Exchange Apparatus
          Ask For Price
          ION EXCHANGE APPARATUS

          Technical Description: The set up consists of two glass column packed with Anion and Cation exchanger resin upto suitable height. The layer of glass wool is placed on bottom and top of the resin bed. The feed is allowed to enter from the bottom of first column and comes out of the top, which is again passed through the second column is same fashion. A digital conductivity meter measures the conductivity of liquid coming out of the second column. Flow rate of water is measured with the pre-calibrated rotameter. A tank with FHP pump with flow control valve and by-pass arrangement is provided for feed circulation.

          Learning Objectives/Experiments • To deionise water to make it soft and to determine the exchange rate and saturation point.

          Required for Operation:
          • Electricity Supply: 1 Phase, 220 V AC, 0.5 kW.
          • Bench Area: 1.2 m x 1 m.
          • Required Chemicals & Laboratory Glassware.
          • Required analyzing equipments as per the system to study.

          Technical Specifications
          • Column (2 Nos.) : Material Borosilicate Glass / Stainless Steel Dia 55mm, Length 500mm approx. (For Anion & Cation)
          • Water Tank : Material Stainless Steel, Capacity 25 Ltrs.
          • Feed Circulation : FHP Pump Tullu / Champion make
          • Flow Measurement : Rotameter, Eureka make
          • Piping : Stainless Steel and PVC size 1/4"
          • Conductivity Measurement : Digital Conductivity Meter

          Control Panel:
          • Standard make on/off switch, Mains Indicator etc.

          Scope of Delivery:
          • 1 Self-contained “Ion Exchange” Apparatus
          • 1 Instruction Manual consisting of experimental procedures, block diagram etc.
          Request
          Callback
          Yes! I am Interested
          View PDF
          X
          Looking for “Mass Transfer Lab Apparatus”?


          Reach Us
          Akash Nautiyal (Managing Director)
          Plot No. 46/19/2, Near Bala Sundri Mandir Herman City Road, Chotta Khudda
          Ambala Cantt, Ambala- 133001, Haryana, India


          Call Us

          Send E-mail

          Send SMS