Quality Engineers

Quality Engineers

Quality Engineers

Ambala Cantt, Ambala, Haryana

Mass Transfer Lab

  • Extraction
  • Absorption & diffusion
  • Distillation
  • Drying & Crystallization
  • Miscellaneous

Packed Bed Type Solid Liquid Extraction Apparatus

REQUEST CALLBACK

Ask for Price

Product Details:

Extraction ColumnMaterial Borosilicate Glass.
Solvent Flow MeasurementRota Meter
Solvent TankMade of Stainless Steel, Capacity 30 Ltrs. Double wall.
Solvent circulationMagnetic Pump made of Polypropylene to Circulate solvent.
HeaterNichrome wire heater
Temperature SensorRTD PT-100 Type.
Electricity Supply1 Phase, 220 V AC, 1.5 kW
Digital Temp. Controller0-199.9 deg C (For Hot Water Bath)

We are among the leading manufacturers, suppliers and exporters of Solid Liquid Extraction Packed Bed Type to our valuable customers. This apparatus is precisely designed from premium quality stainless steel, which is procured from well known vendors. The offered apparatus is commonly used for performing various solid liquid extractions that are used in different sample preparation in lab.

Technical Description:
  • This setup is designed to study the performance characteristics of solvent extraction of a particular component from a packed bed of solid material. The apparatus allows study of such systems as water/inorganic salts, water/sugar bed, methylene chloride/vegetable oil etc. The glass column is fitted with SS mesh to support the solid material. The solvent is introduced near the bottom of the column and it flows upward counter-currently to the solids. A pump supplies the solvent and flow rate is monitored by means of a Rota meter. Solvent feed tank is kept in a bath fitted with heater and digital temperature controller is used to maintain the constant temperature

Learning Objectives/Experiments:
  • To study the effect of various system parameters like, solvent temperature, solvent rate and particle size on the %age recovery of oil from solid.

Required for Operation:
  • Solvent: 30ltrs.
  • Solid: 10kg
  • Table for setup support

Control Panel:
  • Standard make On/Off switch, Mains Indicator etc.

Scope of Delivery:
  • 1 Self-contained 'Solid Liquid Extraction Packed Bed Type' Apparatus
  • 1 Instruction Manual consisting of experimental procedures, block diagram etc.

Additional Information:

Item Code: QMT-05

Yes! I am Interested

View PDF

Rotary Dryer

REQUEST CALLBACK

Ask for Price

Product Details:

DesignCustomized
Drying ShellMaterial Stainless Steel, Length 1.5 m, Dia 110 mm.
Temperature SensorsRTD PT-100 type.
Product ReceiverMaterial Stainless Steel, Compatible Capacity.
Rotating ActionUsing motor coupled with a Reduction Gear Box.
Hot Air CirculationBy forced draft fan, Arrangement is done to vary the air flow rate.
Heating Chamber Compatible capacity
Floor space1.5 m x 2 m
Electricity Supply1 Phase, 220 V AC, 4 kW
Feed Hopper Material Stainless Steel, Compatible Capacity
HeaterNichrome wire heater

Owing to the vast experience and knowledge of this field, we have been able to offer premium quality Rotary Dryer to our esteemed customers. Manufactured in compliance with the industry laid standards, this apparatus is commonly used for various drying purposes. The offered dryers are known for their hassle free operations and easy maintenance.

Technical Description:
  • Rotary dryer is a unit in which drying is done by forced draft action created by hot air. The set-up consists of a long revolving cylindrical shell slightly inclined towards the outlet. The shell is fitted with two brackets for support. Air from a blower passes through a heating chamber serves the purpose of drying agent. An arrangement for rotating the dryer shell at low RPM is provided by means of an electrical motor and a reduction gearbox. Wet feed enters from one end of the cylinder and dry material discharges from the other end. As the shell rotates internal flights lift the solids and shower them down through the interior of the shell. This action increases the contact of wet solid against hot air making the dryer very effective. The flow of hot air is counter-current to solids. Flow control and by-pass valve are fitted to regulate the airflow.

Learning Objectives/Experiments:
  • To study the operation of a Rotary Dryer.
  • To study the drying characteristics of a solid material under batch drying condition in a rotary dryer.

Required for Operation:
  • Wet Solid.

Control Panel:
  • Standard make On/Off switch, Mains Indicator etc.
  • Digital Temp. Controller 0-199.9°C (For Hot Air).

Scope of Delivery:
  • 1 Self Contained "Rotary Dryer" Apparatus.
  • 1 Instruction Manual consisting of experimental procedures, block diagram etc.

Additional Information:

Item Code: QMT-18

Yes! I am Interested

View PDF

Natural Draft Tray Dryer

REQUEST CALLBACK

Ask for Price

Product Details:

MaterialStainless Steel insulated by Ceramic wool and housed in a MS Chamber.
Maximum Temperature120 degree C
Electricity Supply1 Phase, 220 V AC, 2 kW.
Drying Chamber Material Size30 x 30 x 30 cm
HeaterNichrome wire heater
Temperature SensorRTD PT-100 type
Weighing BalanceDigital, 0-1000gm. of +- 1 gm resolution.

Owing to the vast experience and knowledge of this field, we have been able to offer premium quality Natural Draft Tray Dryer to prestigious customers. These dryers are commonly used for analyzing the moisture elimination by various condition of high temperature under natural draft action. This draft action is generated by the hot stream of air.

Technical Description:
  • Natural Draft Tray Dryer is a dryer in which moisture removal takes place by heat under natural condition. The set-up consists of an insulated Stainless Steel chamber fitted with heater. Inside the chamber a tray is attached directly to an electronic weighing balance, which is fitted on the bottom, outside the chamber. Material for drying is placed in the tray and regular loss of weight is monitored. Temperature controller fitted in the set-up maintains the required temperature in the chamber.

Learning Objectives/Experiments:
  • To study the drying characteristics of a solid material under batch drying condition.
  • Determination of drying rate and to plot moisture lost with time under for different operating conditions.

Required for Operation:
  • Drying Solids.
  • Table for setup support

Control Panel:
  • Standard make On/Off switch, Mains Indicator etc.
  • Digital Temp. Controller 0-199.9°C for Drying Chamber.

Scope of Delivery:
  • 1 Self Contained 'Natural Draft Tray Dryer' Apparatus.
  • 1 Instruction Manual consisting of experimental procedures, block diagram etc.

Additional Information:

Item Code: QMT-16

Yes! I am Interested

View PDF

Forced Draft Tray Dryer

REQUEST CALLBACK

Ask for Price

Product Details:

Drying ChamberInsulated double wall chamber
Weighing BalanceDigital (0-1000gm) of +- 1 gm resolution.
Hot Air CirculationBy forced draft fan, Arrangement is done to vary the air flow rate.
Heating ChamberCompatible capacity.
Electricity Supply1 Phase, 220 V AC, 2.5 kW
Temperature SensorsRTD PT - 100 Type
Size20 x 20 x 25 cm

Our organization holds expertise in offering premium quality Forced Draft Tray Dryer to our valuable customers. Manufactured as per the industry set standards, these forced draft tray dryers are widely used for the purpose of analyzing the rate of drying of wet sawdust. The offered analyzing is performed under a wide range of different temperature conditions.

Technical Description:
  • Forced Draft Tray Dryer is a dryer in which moisture removal takes place by means of forced draft action created by hot air. The set-up consists of an insulated double wall chamber. Inside the chamber a tray is attached directly to a electronic weighing balance, which is fitted on the bottom, outside the chamber. Material for drying is placed in the tray and regular loss of weight is monitored. Air from a blower passes through a heating chamber and is used as drying agent. Arrangement is done to vary the airflow rate.

Learning Objectives/Experiments:
  • To study the drying characteristics of a solid under forced draft condition and determine the critical moisture content.
  • To correlate the constant drying rate with air mass velocity.

Control Panel:
  • Digital Temp. Indicator: 0-199.9 °C (with multi-channel switch)
  • Standard make on/off switch, Mains Indicator etc.

Scope of Delivery:
  • Self-contained 'Forced Draft Tray Dryer' Apparatus
  • Instruction Manual consisting of experimental procedures, block diagram etc.

Additional Information:

Item Code: QMT-17

Yes! I am Interested

View PDF

Adsorption in Packed Bed Apparatus

REQUEST CALLBACK

Ask for Price

Product Details:

Minimum Order Quantity1 Piece
Feed tankMaterial Stainless Steel, Capacity 20 litres
PipingStainless Steel and PVC
Size1/4 Inch
Flow measurementRotameter for feed.
Column (3 Nos)Material Borosilicate glass of different dia.
Capacity20 litres
Feed circulationFHP, Magnetic Pump made of Polypropylene
Stop WatchElectronic

Owing to the rich experience and knowledge of this field, we have been able to offer optimum quality Adsorption in Packed Bed Apparatus to our valuable customers. The offered apparatus is commonly used for determining the process of adsorption in packed bed arrangement. Due to the hassle free installation and simple construction, these apparatus is highly demanded in the market.

Technical Description:
  • The set up consist of three vertical column packed with activated Charcoal. Columns are operated individually. Liquid feed with dye is fed to the individual column from the bottom and samples are collected from the top at regular interval of time. Rotameter is provided to measure the flow rate. Pump with a feed tank is provided for fluid flow.

Learning Objectives/Experiments:
  • To obtain the breakthrough curve and hence length of unused bed for the given adsorption system.

Required for Operation:
  • Electricity Supply: 1 Phase, 220 V AC, 0.5 kW
  • Bench Area: 1.2m x 1m.
  • Required Chemicals & Laboratory Glassware.
  • Colorimeter. Required analyzing equipments as per the system to study.

Control Panel:
  • Standard make On/Off switch, Mains Indicator etc.

Scope of Delivery:
  • 1 Self-contained 'Adsorption in Packed Bed Apparatus' Apparatus
  • 1 Instruction Manual consisting of experimental procedures, block diagram etc.

Additional Information:

Item Code: QMT-26

Yes! I am Interested

View PDF

Batch Crystallizer

REQUEST CALLBACK

Ask for Price

Product Details:

HeaterNichrome wire heater
Crystallizer (Jacketed Type)Material Stainless Steel, Cap. 2Ltrs. with conical bottom.
Flow measurementRotameter
PumpFHP
Electricity Supply1 Phase, 220 V AC, 1.5 kW
Stainless Steel Capacity2 L
Temperature SensorsRTD PT-100 type
Crystallizer (Jacketed Type) MaterialStainless Steel
Crystallizer (Jacketed Type) Capacity2Ltrs.
Cooling Water Tank MaterialStainless Steel
Cooling Water Tank Capacity30 L
Receiving Tank MaterialStainless Steel , Capacity 2litre with SS sieve.
StirrerFHP, Variable Speed.
Cooling Water TankMaterial Stainless Steel , Capacity 30litre fitted with Pump.

Batch Crystallizer is the formation of solid particles within a homogeneous phase of saturated liquid. Its wide use has a two-fold basis, a crystal formed from an impure solution is itself pure and crystallization affords a practical method of separating w. This operation involves both heat and mass transfer. Cooling type agitated batch crystallizer set up consists of an open jacketed stirred vessel provided with water heating & cooling arrangement. The feed is prepared in the crystallizer itself with hot water and stirrer. The hot saturated solution in the crystallizer is then cooled by circulation of cooling water and crystals are formed.

Learning Objectives/Experiments:
  • To study the performance of a Batch Crystallizer.
  • To determine the crystal yield and the efficiency of crystallizer.

Required for Operation:
  • Water Supply.
  • Drain.
  • Required Chemicals

Control Panel:
  • Standard make On/Off switch, Mains Indicator etc.
  • Digital Temp. Indicator 0-199.90C with multi-channel switch.

Scope of Delivery:
  • 1 Self Contained "Batch Crystallizer" Apparatus.
  • 1 Instruction Manual consisting of experimental procedures, block diagram etc.

Additional Information:

Item Code: QMT-20

Yes! I am Interested

View PDF

Vapour In Air Diffusion Equipment

REQUEST CALLBACK

Ask for Price

Product Details:

MaterialWith two sides made of glass Capacity 8Ltrs. fitted with heater and stirrer.
Temperature SensorRTD PT-100 type
Digital Temp Controller cum-IndicatorFor Water Bath 0-199.9 deg C
StirrerStainless Steel, Impeller and shaft coupled with FHP motor

Technical Description:
  • Using a small sample of the liquid in a narrow vertical tube, and observing its rate of evaporation into stream of air passed across the top of the tube can conveniently be used to study the diffusion of vapour of a volatile liquid into air. The set up consists of a glass tube placed in a water bath. A horizontal glass tube is fixed to the upper end of the tube and air is drawn through this by a small air pump included within the unit. Air flows over this tube maintaining partial pressure difference. A Traveling microscope with sliding vernier scale is provided to measure the rate of fall of solvent within capillary. A stirrer is fitted to maintain constant temperature inside the bath.

Learning Objectives/Experiments:
  • Determination of the diffusion co-efficient of an organic vapour in air.
  • To study the effect of temperature on diffusion co-efficient.

Required for Operation:
  • Required Chemicals & Laboratory Glassware.
  • Table for setup support
  • The whole set-up is ingeniously designed and schematically arranged on a powder-coated rigid structure

Control Panel:
  • Standard make On/Off switch, Mains Indicator etc.

Scope of Delivery:
  • 1 Self-contained 'Vapour In Air Diffusion' Apparatus
  • 1 Instruction Manual consisting of experimental procedures, block diagram etc.

Additional Information:

Item Code: QMT-14

Yes! I am Interested

View PDF

Simple Batch Distillation Apparatus

REQUEST CALLBACK

Ask for Price

Product Details:

Design TypeCustomised
Electricity Supply1 Phase, 220 V AC, 2 kW
Water SupplyContinuous 4 LPM at 1 Bar
Digital Temp. Indicator0-199.90C with multi-channel switch

The equipment consists of a distillation still made of stainless steel. The feed in the still is heated externally by heater. The vapous form the top of the vessel is condensed in the type condenser by circulating cooling water. Temperature of the feed mixture is controlled by means of a digital temperature Controller. The condensate is collected in a receiver made of stainless steel.

Learning Objectives/Experiments:
  • To study the characteristics of Simple Distillation.
  • To verify of Reyleigh’s Equation.

Required for Operation:
  • Floor Drain.
  • Required Chemicals.

Other Details:
  • Flow measurement
  • Rotameter for cold water for condenser
  • Distillation still
  • Made of Stainless Steel, capacity 5ltrs. Insulated with ceramic wool
  • And cladding with Aluminum foil.
  • Condenser
  • Concentric Tube type made of Stainless Steel
  • Distillate tank
  • Made of Stainless Steel, capacity 2 Ltrs.
  • Heater
  • Nichrome wire heater.
  • The whole set-up is ingeniously designed and schematically arranged on a powder-coated rigid structure.

Control Panel:
  • Standard make On/Off switch, Mains Indicator etc.
  • Digital Temp. Controller 0-199.9°C, RTD PT-100 type (For Steam Generator).

Scope of Delivery:
  • 1 Self Contained "Simple Batch Distillation Set-Up" Apparatus.
  • 1 Instruction Manual consisting of experimental procedures, block diagram etc.

Additional Information:

Item Code: QMT-10

Yes! I am Interested

View PDF

Mass Transfer with & without Chemical Reaction Apparatus

REQUEST CALLBACK

Ask for Price

Product Details:

HeaterNichrome Wire Heater
ReactorMaterial Stainless Steel, Capacity 2 Ltrs. (approx)
Water BathMaterial Stainless Steel, Double Wall,nsulated with ceramic fibre wool.
Electricity Supply1 Phase, 220 V AC, 0.5 kW
StirrerStainless Steel Impeller and shaft coupled with DC motor drive for variable speed
Temperature SensorsRTD PT-100 type
RPM IndicatorDigital, Non contact type. Digital Temp. Controller: 0-199.90C for hot water tank.
Instruction ManualAn English instruction manual will be provided along with the Apparatus

The setup consists of a Reactor, in which solid cylinder of Benzoic Acid is placed and is stirred by means of a variable speed mixer. Baffles are also provided. The Reactor is made of Stainless Steel. Peltilizer is provided to make the solid cylinder of Benzoic Acid. Constant temperature water bath arrangement is provided to conduct the experiment at various temperatures.

Experimentation:
  • Dissolution of Benzoic acid in water: Kinetic studies
  • Dissolution of Benzoic acid with reaction in aqueous NaOH solution.

Utilities Required:
  • Water Supply
  • Drain
  • Instruments, Laboratory Glassware and Chemicals required for analysis as per the system adopted

Additional Information:

Item Code: QMT-24

Yes! I am Interested

Vapour- Liquid Equilibrium Set- Up Apparatus

REQUEST CALLBACK

Ask for Price

Product Details:

MaterialStainless Steel
Temperature SensorsRTD PT-100 type
Distillation Still MaterialStainless Steel
Capacity1 L
Condenser typeConcentric Tube
HeaterNichrome wire
Cooling Water Tank Capacity15 Ltrs.

The basic data of any distillation problem are the equilibrium between the liquid and vapours phases of the system subjected to distillation. Hence is of great importance to study the vapour liquid equilibrium. The set-up consists of distillation still with a heating element. An electrical Dimmer stat is connected to heating element for varying heat input. The vapours form the top of column is condensed in the shell and tube type condenser by circulating cooling water. The condensate is collected in reflux drum and feedback to column as reflux. A tank with pump is provided to circulate cold water to condenser. Flow rates can be regulated through control valve fitted. Instrumentation is provided to measure the temperatures at different points

Learning Objectives/Experiments:
  • To determine the vapour Liquid Equilibrium curve for CCl4 and Toluene or any other mixture.

Required for Operation:
  • Water Supply.
  • Drain.
  • Refractrometer for Analysis.
  • Required Chemicals

Control Panel:
  • Standard make On/Off switch, Mains Indicator etc.Digital Voltmeter: 0-300 Volt.Dimmer stat: 0-230 V, 2A.Digital Temp. Indicator: 0-199.90C RTD PT-100 Type.

Scope of Delivery:
  • 1 Self-contained 'Vapour-Liquid Equilibrium Set-Up' Apparatus1 Instruction Manual consisting of experimental procedures, block diagram etc.

Additional Information:

Item Code: QMT-23

Yes! I am Interested

View PDF

Wetted Wall Column Apparatus

REQUEST CALLBACK

Ask for Price

Product Details:

ColumnBorosilicate Glass Dia 45 mm, Length 1000 mm (approx.)
Heating Chamber capacityCompatible
Water Tank MaterialStainless Steel
Water Tank Capacity20 Litres
Electricity Supply1 Phase, 220 V AC, 0.5 kW
Digital Temp. Indicator0-199.90C, RTD PT-100 type with multi-channel switch. Standard make on/off switch, Mains Indicator
Instruction ManualAn ENGLISH instruction manual will be provided along with the Apparatus
Water CirculationFHP Pump
HeaterNichrome Wire Heater
RotameterFor water flow rate measurement.
Dry & wet Bulb TempWith Digital Temperature Indicator.
Temperature SensorsRTD PT-100 Type.

The set up consists of a glass column. Water is fed at the top of the column along the walls to make the column a Wetted Wall Column. Hot air from heating chamber with known humidity is allowed to pass through the column vertically upward and evaporation in the liquid film around the wall takes place. The flow rates of water and air can be independently varied to simulate different conditions. Instrumentation is provided to measure the dry and wet bulb temperatures at air inlet and outlet.

Experimentation:
  • To determine the gas film coefficient in a wetted wall column using air-water
  • system.
  • To find the mass transfer coefficient

Utilities Required:
  • Compressed Air Supply at 2 Bar, 4 CFM.
  • Water supply.
  • Drain.

Additional Information:

Item Code: QMT-22

Yes! I am Interested

Sieve Plate Distillation Column Apparatus

REQUEST CALLBACK

Ask for Price

Product Details:

Design TypeCustomised
RotameterFor cooling water flow rate measurement.
Distillate TankMade of Stainless Steel, capacity 5 Ltrs.
HeatersNichrome wire heater.
Steam GeneratorMade of Stainless Steel, provided with Pressure Gauge & Level Indicator
Reflux DividerSpecial arrangement to change R/D ratio automatically.
Temperature SensorsRTD PT-100 type.
Distillation ColumnMaterial Stainless Steel, Dia 110mm, seven sieve trays
Pressure GaugeBourdon type, 0-2 kg/cm2
CondenserShell & Tube type made of Stainless Steel.
Bottom Product TankMade of Stainless Steel, Capacity 5 Ltrs.

Column is made of Stainless Steel material with seven sieve trays. An electrically heated re-boiler is installed at the bottom of the column. The bottom product is collected in the tank. The vapours form the top of column are condensed in the shell and tube type condenser by cooling water supplied by laboratory overhead tank. The condensate is divided into reflux and distillate by automatic reflux divider and R/D Ratio can be varied. Reflux is fed back to the column and distillate is received in a receiving tank. The complete column is insulated for minimizing the heat loss. Instrumentation is provided for pressure & temperature measurement wherever necessary

Learning Objectives/Experiments:
  • To estimate the batch curves for a binary system and verify the binary distillation equation for a known number of theoretical plates.
  • To operate the column under total reflux condition and estimate the minimum number of theoretical plates required.

Required for Operation:
  • Water Supply 2 LPM at 5m head.
  • Drain.
  • Electricity Supply: 1 Phase, 220 V AC, 6 kW.
  • Required Chemicals.
  • Refractrometer for analysis

Control Panel:
  • Standard make On/Off switch, Mains Indicator etc.
  • Digital Temp. Controller 0-199.9°C for Drying Chamber.
  • Digital Temp. Indicator 0-199.90C, (with multi-channel switch).

Scope of Delivery:
  • 1 Self Contained 'Sieve Plate Distillation Column Apparatus' Apparatus.
  • 1 Instruction Manual consisting of experimental procedures, block diagram etc.

Additional Information:

Item Code: QMT-07

Yes! I am Interested

View PDF

Fluidized Bed Dryer

REQUEST CALLBACK

Ask for Price

Product Details:

Air CirculationBy forced draft fan, Arrangement is done to vary the air flow rate.
Electricity Supply1 Phase, 220 V AC, 3 kW.
Column MaterialBorosilicate Glass
Column Diameter80 mm
Column Length500 mm
Cyclone Separator MaterialStainless Steel
HeaterNichrome wire heater
Heating ChamberCompatible capacity
Temperature SensorsRTD PT-100 type.

This is a dryer in which moisture removal takes place by Fluidized Bed Dryer by hot air. The set-up fitted with a specially designed, vertical Glass Column. The lower portion of the column is filled with fluidizing material. The material is supported on the screen mesh held between two flanges. Air from a compressor is heated in the heater box and passed through the column. Flow control and by-pass valve are fitted to regulate the airflow. At the top outlet of column a cyclone is provided to collect any solid particles taken out by the air stream.

Learning Objectives/Experiments:
  • To study the fluidized bed drying
  • To plot the drying curve under fluidized bed condition

Required for Operation:
  • Granular and free flowing solid of size 1 to 2 mm

Control Panel:
  • Standard make On/Off switch, Mains Indicator etc.
  • Digital Temp. Controller 0 199.9°C

Scope of Delivery:
  • 1 Self Contained "Fluidized Bed Dryer" Apparatus.
  • 1 Instruction Manual consisting of experimental procedures, block diagram etc.

Additional Information:

Item Code: QMT-19

Yes! I am Interested

View PDF

Liquid Liquid Extraction In A Packed Tower

REQUEST CALLBACK

Ask for Price

Product Details:

PackingRasching Rings, Material Borosilicate Glass
Extraction Column Height750 mm (approx)
Feed Tanks MaterialStainless Steel
Feed Tanks Capacity20 Ltrs. (2 Nos.)
Feed CirculationBy Compressed Air
Flow MeasurementRotameters (One each for solvent & solute)
Instruction ManualAn English instruction manual will be provided along with the Apparatus
Extract & Raffinate TanksMaterial Stainless Steel, Cap 10 Ltrs.
Compressed Air Supply2 Bar, 0.5 CFM.
Extraction Column MaterialBorosilicate Glass
Extraction Column diameter55 mm

The set-up consists of a glass column packed with Rasching rings. Continuous counter current contacts between the solvent and solute phases is made, which results into extract and raffinate streams. Flow meters (Rotameters) are used to note the flow of solvent & solute respectively. The continuous and dispersed phase streams are metered and derived from separate containers. The total set-up is housed in a well-designed rigid structure. The structure also supports tanks, piping, Rotameters, panel and other units.

Experimentation:
  • To determine overall mass transfer co-efficient based on continuous & dispersed phase.
  • To determine individual “Height of Transfer Unit” based on continuous & dispersed phase.

Utilities Required:
  • Compressed Air Supply at 2 Bar, 0.5 cfm.
  • Water Supply
  • Drain.
  • Required Chemicals & Laboratory Glassware.

Additional Information:

Item Code: QMT-01

Yes! I am Interested

Bubble Cap Distillation Column

REQUEST CALLBACK

Ask for Price

Product Details:

MaterialStainless Steel
RotameterFor cooling water flow rate measurement. Indicator, Safety valve
Electricity Supply1 Phase, 220 V AC, 6 kW
Distillation Column diameter110mm
Bottom product tank capacity5 Ltrs
Distillate tank capacity5 Ltrs
HeaterNichrome wire heater.
Temperature Sensors typeRTD PT-100
Pressure GaugeBourdon type
CondenserShell & Tube type made of Stainless Steel
Reflux DividerSpecial arrangement to change R/D ratio automatically.
Water Supply2 LPM at 5 m head.

The column is made of Stainless Steel with seven plates for mounting the bubble caps. Each plate is provided with one bubble cap. An electrically heated reboiler is installed at the bottom of the column. The bottom product is collected in the tank. The vapours form the top of column are condensed in the shell and tube type condenser by cooling water supplied by laboratory overhead tank. The condensate is divided into reflux and distillate by automatic reflux divider and R/D Ratio can be varied. Reflux is fed back to the column and distillate is received in a receiving tank. The complete column is insulated for minimizing the heat loss. Instrumentation provided for pressure & temperature measurement wherever necessary.

Learning Objectives/Experiments:
  • To estimate the batch distillation curves for a binary system and verify the binary batch distillation equation for a known number of theoretical plates.
  • To operate the column under total reflux condition and estimate the minimum number of theoretical plates required.

Required for Operation:
  • Drain.
  • Required Chemicals.
  • Refractometer for analysis

Control Panel:
  • Standard make On/Off switch, Mains Indicator etc.
  • 0-199.9°C, For Reboiler.
  • 0-199.9oC, with multi-channel switch

Scope of Delivery:
  • 1 Self-contained 'Bubble Cap Distillation Column' Apparatus
  • 1 Instruction Manual consisting of experimental procedures, block diagram etc.

Additional Information:

Item Code: QMT-06

Yes! I am Interested

View PDF

Absorption in Wetted Wall Column

REQUEST CALLBACK

Ask for Price

Product Details:

MaterialStainless Steel
Feed CirculationBy compressed air. (One each for feed, air & CO2).
Column Height1000 mm (approx)
Pressure Regulator0-2 kg/cm2
Pressure GaugeBourdon type
Feed Tank MaterialStainless Steel
Feed Tank Capacity20 Ltrs.
Flow measurementRotameters
Collecting Tank Capacity10 Ltrs
Compressed Air Supply2 Bar, 4 CFM.
Column materialBorosilicate Glass
Column Diameter45 mm

We are indulged in offering Absorption in Wetted Wall Column to our clients. In compliance with set industry norms, our supervisors manufacture and design this product using supreme class material. It is corrosion resistant and gives optimum performance. It also has high strength and extended durability that makes the product super-efficient. Proper quality test is performed so as to ensure the performance of this product before dispatching.

Technical Description:
  • The set up consists of a glass column. Alkaline liquid is fed at the top of the column along the walls to create a laminar liquid flow along the walls of a wetted wall column. Flow rates of Air and Co2, are measured separately, mixed in a mixing chamber and then passed through the column vertically upward and absorbed in liquid film around the wall. All the flow rates can be independently varied to simulate different conditions. Liquid Sample can be taken out from the sampling point at the bottom of the column for analysis.

Learning Objectives/Experiments:
  • To determine the number of transfer units, Height of transfer unit and overall mass transfer co-efficient for the given system.

Required for Operation:
  • Water Supply
  • Floor Drain.
  • CO2 cylinder with control valve, pressure regulator and Pressure gauges
  • Required Chemicals & Laboratory Glassware.

Control Panel:
  • Standard make On/Off switch, Mains Indicator etc.

Scope of Delivery:
  • 1 Self-contained 'Absorption in Wetted Wall Column' Apparatus
  • 1 Instruction Manual consisting of experimental procedures, block diagram etc.

Additional Information:

Item Code: QMT-13

Yes! I am Interested

View PDF

Experimental Water Cooling Tower Apparatus

REQUEST CALLBACK

Ask for Price

Product Details:

PackingExpanded wire mesh.
Air CirculationBy forced draft fan, arrangement is done to vary the air flow rate.
Air Flow MeasurementOrifice meter with U-tube manometer.
Dry & Wet Bulb TemperatureMeasured by Temperature Sensors insulated with ceramic fibre wool.
Temperature sensorsRTD PT-100 type 6 Nos.

Experimental Water Cooling Tower is a forced draft counter flow type cooling tower specially designed for the Engineering students to provide them insight about actual working of tower. In this system, air from a fan enters at the bottom of the tower and after passing through the mesh packing, discharges into the atmosphere via a duct. Airflow is controlled by a butterfly valve on the blower's delivery line. Water is evenly distributed over the packing by nozzles at top of the tower. Water flow and temperatures can be measured and controlled with suitable instrumentation provided. A water tank at the bottom fitted with level gauge enables to show the exact evaporation loss. Front side acrylic sheet provides actual visualization of cooling tower operation. Air and water flow rates as well as inlet water temperatures can be varied to have different sets of readings.

Learning Objectives/Experiments:
  • Actual visualization of the cooling tower operation.
  • To determine the mass transfer coefficient

Required for Operation:
  • Water Supply & Drain.

Control Panel:
  • Standard make On/Off switch, Mains Indicator etc.
  • 0-2000C, for hot water tank.
  • 0-199.90 C, with multi-channel switch

Scope of Delivery:
  • 1 Self-contained 'Experimental Water Cooling Tower' Apparatus
  • 1 Instruction Manual consisting of experimental procedures, block diagram etc.

Additional Information:

Item Code: QMT-25

Yes! I am Interested

View PDF

Packed Bed Distillation Column

REQUEST CALLBACK

Ask for Price

Product Details:

Reflux DividerSpecial arrangement to change R/D ratio automatically.
RotameterFor cooling water flow rate measurement
CondenserShell & Tube type made of Stainless Steel.
Distillate tank:Made of Stainless Steel, capacity 5Ltrs.
HeatersMade of Stainless Steel, capacity 5Ltrs. Nichrome wire heater.
Temperature SensorsRTD PT-100 type

The column is made of Stainless Steel material packed with Packed Bed Distillation Column. An electrically heated re-boiler is installed at the bottom of the column. The bottom product is collected in the tank. The vapours form the top of column are condensed in the shell and tube type condenser by circulating cooling water, supplied by laboratory overhead tank. The condensate is divided into reflux and distillate by automatic reflux divider and R/D Ratio can be varied. Reflux is fed back to the column and distillate is received in a receiving tank. The complete column is insulated for minimizing the heat loss. Instrumentation is provided for pressure & temperature measurement wherever necessary.

Learning Objectives/Experiments:
  • To estimate the batch distillation curves for a binary system and verify the binary batch distillation equation for a known packed height.
  • To operate the column under total reflux condition and estimate the HETP for the packing.

Required for Operation:
  • Required Chemicals.
  • Refractometer for analysis.
  • Steam Generator: Made of Stainless Steel, provided with Pressure Gauge Level Indicator, Safety Valve & insulated with ceramic wool and Cladding with Aluminum foil.
  • The whole set-up is ingeniously designed and schematically arranged on a powder-coated rigid structure.

Control Panel:
  • Standard make On/Off switch, Mains Indicator etc.
  • Digital Temp. Controller 0-199.9 °C, For Re-boiler.
  • Digital Temp. Indicator 0-199.9 °C, with multi-channel switch.

Scope of Delivery:
  • 1 Self-contained 'Packed Bed Distillation Column' Apparatus
  • 1 Instruction Manual consisting of experimental procedures, block diagram etc.

Additional Information:

Item Code: QMT-08

Yes! I am Interested

View PDF

Solid in Air Diffusion Apparatus

REQUEST CALLBACK

Ask for Price

Product Details:

Compressed Air Supply2 Bar, 4 CFM.
Diffusion Column MaterialBorosilicate Glass
Air flow MeasurementRota meter
Weighing Balance resolution0.01 gm

Confirming a packed bed of spherical balls of a solid in a vertical tube, and observing its rate of diffusion into the stream of air passed across the top of the tube can conveniently study the diffusion of solid into the air. The equipment is fitted with a vertical glass column with a mesh near the base of the column to hold the spherical balls. Spherical balls of known weight and diameter are filled in the column to make a packed bed. Air is allowed to pass through the silica gel chamber. From the bottom of the column, dry air is allowed to enter in the packed bed.

Learning Objectives/Experiments:
  • To calculate the mass transfer coefficient of vaporization of naphthalene in air using a packed bed of spherical particles of naphthalene.
  • To plot Sh/Sc 1/3 Vs Re on log 45g graph and determine the functional relationship.

Required for Operation:
  • Solid Spherical Balls of Naphthalene
  • Table for setup support

Control Panel:
  • Standard make On/Off switch, Mains Indicator etc.

Scope of Delivery:
  • 1 Self-contained 'Solid in Air Diffusion Apparatus' Apparatus
  • 1 Instruction Manual consisting of experimental procedures, block diagram etc.

Additional Information:

Item Code: QMT-15

Yes! I am Interested

View PDF

Spray Tower Apparatus

REQUEST CALLBACK

Ask for Price

Product Details:

Distillation ColumnMaterial Stainless Steel, Dia 110mm, seven sieve trays.
Pressure GaugeBourdon type, 0-2 kg/cm2.
RotameterFor cooling water flow rate measurement.
Reflux DividerSpecial arrangement to change R/D ratio automatically.
CondenserShell & Tube type made of Stainless Steel.
Bottom Product TankMade of Stainless Steel, capacity 5Ltrs.
Distillate TankMade of Stainless Steel, capacity 5Ltrs.
HeatersNichrome wire heater.
Temperature SensorsRTD PT-100 type.

The experimental set-up of Spray Tower consists of a glass column provided with necessary accessories. It operates in a semi-batch mode. The fine spray nozzle is fitted at the top. Feeds are metered by Rotameters and derived from separate feed tanks.

Learning Objectives/Experiments:
  • To study the effect of the dispersed phase flow rate on overall volumetric mass transfer coefficient.
  • Dispersed phase hold-up study.

Required for Operation:

  • Drain.
  • Required Chemicals & Laboratory Glassware.
  • Special arrangement for changing height of interface zone is done.
  • The whole set-up is ingeniously designed and schematically arranged on a powder-coated rigid structure.
  • Pressure Gauge: Bourdon type 0-2 kg/cm2
  • Feed Circulation: By Compressed Air
  • Pressure Gauge: Bourdon type 0-2 kg/cm2
  • Feed Circulation: By Compressed Air
  • Pressure Gauge: Bourdon type 0-2 kg/cm2
  • Feed Circulation: By Compressed Air

Control Panel:

  • Standard make On/Off switch, Mains Indicator etc.

Scope of Delivery:

  • 1 Self-contained 'Spray Tower' Apparatus
  • 1 Instruction Manual consisting of experimental procedures, block diagram etc

Technical Description:
Column is made of Stainless Steel material with seven sieve trays. An electrically heated re-boiler is installed at the bottom of the column. The bottom product is collected in the tank. The vapours form the top of column are condensed in the shell and tube type condenser by cooling water supplied by laboratory overhead tank. The condensate is divided into reflux and distillate by automatic reflux divider and R/D Ratio can be varied. Reflux is fed back to the column and distillate is received in a receiving tank. The complete column is insulated for minimizing the heat loss. Instrumentation is provided for pressure & temperature measurement wherever necessary

Learning Objectives/Experiments:

  • To estimate the batch curves for a binary system and verify the binary distillation equation for a known number of theoretical plates.
  • To operate the column under total reflux condition and estimate the minimum number of theoretical plates required.

Required for Operation:
  • Water Supply 2 LPM at 5m head.
  • Electricity Supply: 1 Phase, 220 V AC, 6 kW.
  • Required Chemicals.
  • Refractometer for analysis

Control Panel:
  • Standard make On/Off switch, Mains Indicator etc.
  • Digital Temp. Controller 0-199.9°C for Drying Chamber.
  • Digital Temp. Indicator 0-199.90C, (with multi-channel switch).

Scope of Delivery:

  • 1 Self Contained 'Sieve Plate Distillation Column' Apparatus.
  • 1 Instruction Manual consisting of experimental procedures, block diagram etc.

Additional Information:

Item Code: QMT-03

Yes! I am Interested

View PDF

Absorption in Packed Bed Apparatus

REQUEST CALLBACK

Ask for Price

Product Details:

PackingBorosilicate Glass Reaching Ring
Feed CirculationBy compressed air.
Feed TankMaterial Stainless Steel, Capacity 20 Ltrs.
Flow measurementRota meters (One each for feed, air & CO2).
Pressure Regulator0-2 kg/cm2
Pressure GaugeBourdon type
ColumnBorosilicate Glass Dia. 55 mm, Length 750mm (approx.)
Collecting TankMaterial Stainless Steel, Capacity 10 Ltrs.

Technical Description:
  • The set up consists of a glass column packed with Reaching rings. Liquid is fed at the top of the column through distributor. The solute gas and air are measured separately, mixed in a mixing chamber and then passed through the packed column vertically upward and absorbed in liquid. All the flow rates can be independently varied to simulate different conditions. Liquid sample can be taken out from the sampling point at the bottom of the column for analysis.

Learning Objectives/Experiments:
  • To determine the number of transfer units, Height of transfer unit and overall mass transfer co-efficient for the given system.

Required for Operation:
  • Compressed Air Supply at 2 Bar, 4 CFM.
  • Water Supply.
  • Floor Drain.
  • CO2 cylinder with control valve, pressure regulator and Pressure gauges.
  • Required Chemicals & Laboratory Glassware.

Control Panel:
  • Standard make On/Off switch, Mains Indicator etc.

Scope of Delivery:
  • 1 Self-contained 'Absorption in Packed Bed Apparatus' Apparatus
  • 1 Instruction Manual consisting of experimental procedures, block diagram etc.

Additional Information:

Item Code: QMT-12

Yes! I am Interested

Absorption in Sieve Plate Column Apparatus

REQUEST CALLBACK

Ask for Price

Product Details:

Section MaterialOne section of column is provided of Borosilicate glass to visualize the process
PlatesPerforated Plates made of Stainless Steel (7 Nos.)
Collecting TankMaterial Stainless Steel, Capacity 10 Ltrs.
Flow MeasurementRotameters (One each for feed, air & CO2)

Technical Description:
  • The set up consists of a column fitted with perforated plates. Liquid is fed at the top of the column through distributor. The solute gas and air are measured separately, mixed in a mixing chamber and then passed through the perforated plates vertically upward and absorbed in liquid. All the flow rates can be independently varied to simulate different conditions. Liquid Sample can be taken out from the bottom of the column for analysis.

Learning Objectives/Experiments:
  • To study absorption of CO2 in aqueous NaOH solution in a sieve plate column.
  • To determine the gas phase mass transfer co-efficient, KG.

Required for Operation:
  • Water Supply
  • Floor Drain.
  • CO2 cylinder with control valve, pressure regulator and Pressure gauges
  • Required Chemicals & Laboratory Glassware.
  • The whole set-up is ingeniously designed and schematically arranged on a powder-coated rigid structure.

Control Panel:
  • Standard make On/Off switch, Mains Indicator etc.

Scope of Delivery:
  • 1 Self-contained 'Absorption in Sieve Plate Column Apparatus' Apparatus
  • 1 Instruction Manual consisting of experimental procedures, block diagram etc.

Additional Information:

Item Code: QMT-11

Yes! I am Interested

View PDF

York Scheibel's Extraction Unit

REQUEST CALLBACK

Ask for Price

Product Details:

Extraction ColumnMaterial Borosilicate Glass Dia. 45 mm, Height 750 mm (approx).
Feed Tank (2 Nos)Material Stainless Steel, Capacity 20 Ltrs.
Extract & Raffinate TanksMaterial Stainless Steel, Capacity 10 Ltrs.
Flow MeasurementRotameters (One each for solvent & solute)
PackingWoven mesh of Stainless Steel
AgitatorStainless Steel impellers with Stainless Steel shaft coupled to a Variable Speed DC Motor.
Pressure Regulator0-2 kg/cm2
Feed CirculationBy Compressed Air
Pressure GaugeBourdon type, 0-2 kg/cm2
RPM MeasurementDigital RPM Indicator, non contact type with proximity sensor.

The York Scheibel's Column Apparatus in the class of gravity-operated extractors with mechanical agitation. The presence of alternatively agitating and calming sections in a York Scheibel's column yield higher extraction efficiency than the conventional packed column. In the setup a continuous counter current contact between the solvent and solute phases is made which results into extract and raffinate streams. Flow meters (Rotameter) are used to note the flow of solvent and solute respectively. The continuous and dispersed face streams are metered and derived from separate containers. Each stage consists of a woven wire mesh section and a mixing section. The propeller speed can be controlled to the desired value by a controller. Total set-up is housed in a well-designed rigid structure. The structure also supports tanks, piping, Rotameter, panel and other units.

Learning Objectives/Experiments:
  • To determine overall mass transfer co-efficient based on continuous & dispersed phase.
  • To determine individual `Height of Transfer Unit' based on continuous & dispersed phase.

Required for Operation:
  • Compressed Air Supply at 2 Bar, 0.5 CFM.
  • Water Supply
  • Floor Drain.
  • Electricity Supply: 1 Phase, 220 V AC, 0.5 kW.
  • Required Chemicals & Laboratory Glassware.

Control Panel:
  • Digital RPM Indicator, non contact type with proximity sensor
  • Standard make on/off switch, Mains Indicator etc.

Scope of Delivery:
  • 1 Self-contained “York Scheibel's Column” Apparatus
  • 1 Instruction Manual consisting of experimental procedures, block diagram etc.
  • Photograph is only for reference, final product may vary from it.

Yes! I am Interested

View PDF

Ion Exchange Apparatus

REQUEST CALLBACK

Ask for Price

Product Details:

Column (2 Nos.)Material Borosilicate Glass / Stainless Steel Dia 55mm, Length 500mm approx. (For Anion & Cation)
Water TankMaterial Stainless Steel, Capacity 25 Ltrs.
Bench Area1.2 m x 1 m
Electricity Supply1 Phase, 220 V AC, 0.5 kW
PipingStainless Steel and PVC
Size1/4 Inch
Feed CirculationFHP Pump Tullu / Champion make
Flow MeasurementRotameter, Eureka make
Conductivity MeasurementDigital Conductivity Meter

Technical Description:
  • The set up consists of two glass column packed with Anion and Cation exchanger resin upto suitable height. The layer of glass wool is placed on bottom and top of the resin bed. The feed is allowed to enter from the bottom of first column and comes out of the top, which is again passed through the second column is same fashion. A digital conductivity meter measures the conductivity of liquid coming out of the second column. Flow rate of water is measured with the pre-calibrated rotameter. A tank with FHP pump with flow control valve and by-pass arrangement is provided for feed circulation. Learning Objectives/Experiments To deionise water to make it soft and to determine the exchange rate and saturation point.

Required for Operation:
  • Required Chemicals & Laboratory Glassware.
  • Required analyzing equipments as per the system to study.

Control Panel:
  • Standard make on/off switch, Mains Indicator etc.

Scope of Delivery:
  • 1 Self-contained 'Ion Exchange' Apparatus
  • 1 Instruction Manual consisting of experimental procedures, block diagram etc.

Yes! I am Interested

View PDF
X