Quality Engineers

Quality Engineers

Quality Engineers

Ambala Cantt, Ambala, Haryana

Miscellaneous

Pioneers in the industry, we offer single stage air compressor test rig, double stage air compressor test rig, wind tunnel and centrifugal blower test rig from India.

Single Stage Air Compressor Test Rig

REQUEST CALLBACK

Ask for Price

Product Details:

Manifold TankSuitable Capacity
Motor1 HP
Flow MeasurementOrificemeter with Manometer
Pressure GaugeBourdon Type
Air Tank Capacity90 Liter with safety valve
Temp. MeasurementRTD PT-100 type sensor
StageSingle stage
Energy measurementElectronic Energy meter, L&T make.
MCBFor overload protection.
Instruction ManualAn ENGLISH instruction manual will be
Floor Area1.5 x 0.75 m
CompressorSingle Stage, Capacity 4 CFM

Single Stage Air Compressor Test Rig consists of a single stage reciprocating type air compressor driven by 1 hp motor through a belt. The outlet of the air compressor is connected to a reservoir (Tank) and suction is connected to another air tank with an orifice plate and a water manometer. Bellow is fitted on one side of this air tank to regulate the flow. Temperature of inlet and outlet of air and pressure at outlet can be measured by Temperature sensor and pressure gauge.

Experimentation:

  • To calculate the volumetric efficiency.
  • To calculate isothermal hp.
  • To calculate compression ratio.
  • Tachometer to measure RPM
  • The whole set-up is well designed and arranged in a good quality painted structure.

Yes! I am Interested

Double Stage Air Compressor Test Rig

REQUEST CALLBACK

Ask for Price

Product Details:

MCBFor overload protection
RPM measurementRPM Indicator with Proximity sensor
Air Tank Capacity150 Liter
Temperature MeasurementRTD PT-100 type sensor
Flow MeasurementOrificemeter with Manometer
Motor2 HP
Floor Area2.5 x 1.25 m
Electricity2 kW, 220V AC, Single Phase
CompressorDouble Stage, Double Cylinder
Capacity6.9 CFM max
Working PressureMax. 7 kg/cm2
Spring Balance10 kg, Dial type

Double Stage Air Compressor Test Rig consists of a double stage reciprocating type air compressor driven by 2 hp Motor through a belt. The outlet of the air compressor is connected to a reservoir (Tank) and suction is connected to another air tank with a calibrated orifice plate and a water manometer. Bellow is fitted on one side of the air tank to regulate the flow. The temperature of inlet air, after single compression, inlet and outlet of second compression and pressure in the reservoir and at the intermediate stage can be measured by Temp. Sensors and gauges.

Features:
  • To calculate the volumetric efficiency.
  • To calculate isothermal Horse Power
  • To calculate compression ratio.

Yes! I am Interested

Wind Tunnel

REQUEST CALLBACK

Ask for Price

Product Details:

Test Section250 x 250 x 1000 mm.
Air Velocity Maximum 30 m/s
Digital Force IndicatorFor Lift and Drag force
U Tube Manometer Length500 mm.
Pitot Static TubeFor Velocity Measurement
Inclined manometer300 mm
Multiple Manometer 0-40 Degree inclination with vertical axis
Motor Power3 HP
Floor Area10 x 3.5 m
Electricity Supply3 Phase, 440V AC, 3 KW
TypeOpen Type Wind Tunnel
BlowerCompatible Capacity

Wind Tunnel has been developed to perform various experiments of aerodynamics and fluid flow. This is a open circuit Wind Tunnel provides a region of controlled air flow into which models can be fitted at downstream of working section. The Tunnel consists of bell mouth shaped entry to guide the air smoothly into settling chamber and stabilizes the air flow this follows working section for test section where various models can be tested. Test section with acrylic sheet, will be provided for visual observation. Working section is followed by diffuser section which reduces the dynamic pressure at the exit. A fan coupled with motor is used to produce desired wind velocity.

Features:

  • To plot speed curve for wind tunnel.
  • T study pressure distribution around (A) aerofoil (B) Cylinder (C) Sphere.
  • To measure lift and drag on aerofoil model.
  • To study the development of boundary layer along a plate in Tunnel.

Yes! I am Interested

Centrifugal Blower Test Rig

REQUEST CALLBACK

Ask for Price

Product Details:

Energy measurementElectronic Energy meter, L&T make.
FOR (Fixed Speed)AC motor, 1 hp Crompton make
FOR (Variable Speed)DC motor with Thyristor controlled DC
RPM measurementDigital RPM Indicator with a Proximity sensor.
Instruction ManualAn ENGLISH instruction manual will be provided along with the Apparatus.
Power SupplySingle Phase, 220 V AC
Bench Area Required2.5 m x 0 .5 m
UsageFurnaces, cupolas, mine and air-conditioning plants etc.
Impeller (3 Nos.)Forward Curved, Backward Curved & Radial Curved
Pitot Tube (with manometer)For Static, Dynamic & Differential

We are offering a wide range of Centrifugal Blower Test Rig. This equipment comprises of an FD Centrifugal Blower coupled to a Motor. Three interchangeable impellers with forwarding, backward and radial vanes are provided with the test rig. A Pitot Tube is provided in the delivery line of the blower for static and dynamic pressure measurement.

For (Variable Speed):

  • Power input to the DC Motor is varied by means of a Thyristor controlled DC Drive to vary the RPM of a motor. An RPM Indicator with Proximity sensor indicates the RPM of Blower.

FOR (Fixed Speed):

  • AC motor is provided with MCB for overload protection.

Experiment:

  • To study the effect of forward curved, back curved and radial curved impeller
  • To find out the discharge, head and efficiency of the Centrifugal Blower.
  • To plot the graph Efficiency Vs Discharge
  • To plot the graph Discharge Vs Head

Yes! I am Interested

 





X