Quality Engineers
Quality Engineers
Ambala Cantt, Ambala, Haryana
SEND SMS
SEND EMAIL

Process Control Lab Equipment

Manufacturer of a wide range of products which include level control trainer, pressure control trainer, single tank system, temperature control trainer, time constant of thermocouple thermometer and two tank interacting system.

Level Control Trainer

Level Control Trainer
  • Level Control Trainer
Ask For Price
We are an eminent firm offering Level Control Trainer. The process setup consists of supply water tank fitted with pump for water circulation. The level transmitter used for level sensing is fitted on transparent process tank. For ease of understanding, the product is described with its major components. To meet the requirements of our clients, we are offering quality based product to our valuable suppliers.

Features:

  • optimum quality
  • Simple and easy operation
  • High efficiency

Experimentation:

  • To Study The Open Loop Or Manual Control
  • To Study The Proportional Control
  • To Study The Two Mode (P I) Control
  • To Study The Two Mode (P D) Control
  • To Study The Three Mode (Pid) Control
  • To Study The Tuning Of Controller (Open Loop Method) Using Zeigler-Nichols Method
  • To Study The Stability Of The System Using The Bode Plot
  • Auto Tuning

Utilities Required:

  • Water Supply
  • Compressed Air Supply: 1 Cmh At 3 Bar
  • Electricity Supply: 1 Phase, 220 Vac
  • Computer: Pentium Iv, With Cd Drive, Windows Xp Version Xp Pre-Loaded. One Rs 232 Serial Communication Port Free For Interfacing Unit
  • Table For Setup Support

Technical Details:

  • Level Transmitter: Range 0-300 mm, Capacitance Type, Output 4-20 Ma
  • Process Tank: Material Ss/Glass/Acrylic With Scale. Capacity 2 Ltrs Approx
  • Water Tank: Material Stainless Steel, Capacity 10 Ltrs.
  • Water Circulation: Fhp Pump. Tullu/Champion Make
  • Flow Measurement: Rotameter
  • Control Valve: Compatible Capacity With Pneumatic Actuator
  • I/P Converter: Input 4-20ma, Output 3-15 Psig
  • Pressure Regulator: 0-2 Kg/Cm²
  • Pressure Gauge: Bourdon Type, 0-2 Kg/Cm²
  • Piping: Size ¼”
  • Interfacing Unit: For Input-Output Communication With Auto/Manual Facility
  • Micro-Processor Controller: Pid Setting, Auto Tuning, Fully Programmable With Serial
  • Communication
  • Software: For Experimentation, Pid Control, Data Logging, Trend Plot, Offline
Request
Callback
Yes! I am Interested

Pressure Control Trainer

Pressure Control Trainer
  • Pressure Control Trainer
Ask For Price
The Setup Consists Of A Process Tank In Which Compressed Air Enters Through A Pneumatic Control Valve. The Pressure Transmitter Is Fitted On The Process Tank. The Air Pressure In Process Tank Is Sensed By The Transmitter And Communicated To The Digital Indicating Controller. This Measured Variable Is Compared With The Set Point By Controller And Output Is Generated And Given To I/P Converter, Which In Turn Supply The 3- 15 Psig Pressure To Vary The Opening Of The Pneumatic Control Valve To Eliminate The Error Observed. As The Opening Of Pneumatic Control Valve Varies, The Pressure In The Process Tank Gets Effected. This Process Goes On Until The Set Point Target Is Achieved. A Ball Valve Is Also Provided In The Process Tank To Disturb The System And To Observe The Effect Of Disturbance. These Units Along With Necessary Piping Are Supported In A Well- Designed Housing And Are Fixed On Base Plate.The Present Set-Up Is Completely Computerized Controlled. The Digital Indicating Controller Has A Facility To Interface The System With Computer Which Enables To Change The Pid Parameters Using Computer. The Educational Software And Data-Logging Package Has Been Developed For Unit. The Software Environment Base Is Of Labview Of National Instruments, Usa. This Software Is Compatible To Interfacing Unit Designed By K. C. Engineers. This Software Package Provides A Comprehensive Educational Software Environment Within Which The Pid Investigations Can Be Performed. This Software Is Capable To Tabulate The Sample Readings According To The Requirement Of Experiment Under Study And Results Obtained Can Be Compared. The Real Time Data Acquisition Can Be Done By Interfacing The Set-Up With Computer Using Software.

Experimentation:

  • To Study The Open Loop Or Manual Control
  • To Study The Proportional Control
  • To Study The Two Modes (P I) Control
  • To Study The Two Modes (P D) Control
  • To Study The Three Mode (Pid) Control
  • To Study The Tuning Of Controller (Open Loop Method) Using Zeigler-Nichols Method
  • To Study The Stability Of The System Using The Bode Plot
  • Auto Tuning

Utilities Required:

  • Compressed Air Supply : 1 Cmh At 6 Bar
  • Electricity Supply: 1 Phase, 220 Vac
  • Computer: Pentium Iv, Windows Xp Version Pre-Loaded. One Rs 232 Serial Communication Port Free For Interfacing Unit
  • Table For Setup Support

Technical Details:

  • Pressure Transmitter : Range 0-5 Bar, Type Strain Gauge, Output 4-20 Ma
  • Process Tank : Material Stainless Steel, Capacity 1.5 Ltrs. Powder Coated
  • Control Valve : Compatible Capacity With Pneumatic Actuator
  • I/P Converter : Input 4-20ma, Output 3-15 Psig
  • Pressure Regulator : 0-2 Kg/Cm²
  • Pressure Gauge : Bourdon Type, 0-2 Kg/Cm² , 0-7 Kg/Cm²
  • Piping : Pu Piping
  • Interfacing Unit : For Input-Output Communication With Auto/Manual Facility
  • Micro-Processor Controller : Pid Setting, Auto Tuning, Fully Programmable With Serial
  • Communication
  • Software : For Experimentation, Pid Control, Data Logging, Trend Plot,
  • Offline Analysis And Printing
  • Instruction Manual : An English Instruction Manual Will Be Provided Along
Request
Callback
Yes! I am Interested

Single Tank System

Single Tank System
  • Single Tank System
Ask For Price
The Setup Studies Behaviour Of Single Tank System. It Consists Of Supply Tank,
Pump For Water Circulation, Rotameter For Flow Measurement, One Process Tankswith Scale. The Components Are Assembled On Frame To Form Tabletop Models.

Experimentation:

  • To Obtain The Step Response Of A Single Tank Liquid Level System To A Step
  • Change In Input Flow And Compare It With The Theoretical Response
  • To Determine The Time Constant Of The System From The Step Response Curve And
  • Compare It With The Theoretical Value

Utilities Required:

  • Water Supply
  • Drain
  • Electrical Supply : 1 Phase, 220vac, 0.5kw
  • Stop Watch
  • Table For Set-Up Support

Technical Details:

  • Process Tank: Material Stainless Steel, Circular, With Level Scale(1no.) Capacity 2.5 To 3.5 Litres
  • Supply Tank: Mateiral Stainless Steel, Capacity 20 Litres
  • Overhead Tank: Mateiral Stainless Steel, Capacity 5 Litres
  • Water Circulation: Fhp Pump, Tullu/Standard Make
  • Piping : Ss/Pvc, Size ¼”
  • Flow Measurement : Rotameter
  • Instruction Manual : An English Instruction Manual Will Be Provided Along
  • With The Apparatus
  • The Whole Unit Is Assembled Rigidly On A Base Plate
  • Most Of The Parts Are Powder Coated And Rests Are Painted With Auto Paints
Request
Callback
Yes! I am Interested

Temperature Control Trainer

Temperature Control Trainer
  • Temperature Control Trainer
Ask For Price
The Process Setup Consists Of Heating Tank Fitted With Thyristor-Controlledheater For On Line Heating Of The Water. Water Is Supplied From Laboratory Constant Head Tank And Its Flow Can Be Manipulated And Measured By Provided Rotameter. The Temperature Of The Heated Water Is Sensed By Rtd Sensor. This Measured Variable Through Temperature Transmitter Is Communicated To Digital Indicating Controller. Error Is Calculated And Output, Accordingly, Is Communicated To Thyristor Controlled Heater To Achieve The Set Point. These Units Along With Necessary Piping Are Supported In A Well-Designed Housing And Are Fixed On Base Plate.The Present Set-Up Is Completely Computerized Controlled. The Digital Indicating Controller Have A Facility To Interface The System With Computer Which Enables To Change The Pid Parameters Using Computer. The Educational Software And Data-Logging Package Has Been Developed For Unit. The Software Environment Base Is Of Labview Of National Instruments, Usa. This Software Is Compatible To Interfacing Unit . This Software Package Provides A Comprehensive Educational Software Environment Within Which The Pid Investigations Can Be Performed. This Software Is Capable To Tabulate The Sample Readings According To The Requirement Of Experiment Under Study And Results Obtained Can Be Compared. The Real Time Data Acquisition Can Be Done By Interfacing The Set-Up With Computer Using Software. This Software Can Be Used Outside The Laboratory With The Computer To Familiarize The Students With The Equipment And Procedures With The Help Of Flow Diagrams Provided In The Software. In Flow Diagrams Set Point, Process Variable And Controllers Output Are Visible On The Screen And This Data Can Be Transferred In Excel Files For Further Calculations, Plotting Graphs Etc. Software Allows The User To Have Control On Sampling Time, Data Logging, Printing The Stored Data, Preparing Spread Sheets In Excel Etc.

Experimentation:

  • To Study The Open Loop Or Manual Control
  • To Study The Proportional Control
  • To Study The Two Mode (P I) Control
  • To Study The Two Mode (P D) Control
  • To Study The Three Mode (Pid) Control
  • To Study The Tuning Of Controller (Open Loop Method) Using Zeigler-Nichols Method
  • To Study The Stability Of The System Using The Bode Plot
  • Auto Tuning

Utilities Required:

  • Water Supply 2 Lpm
  • Electricity Supply: 1 Phase, 220 Vac
  • Computer : Pentium Iv With Cd Drive, Windows Xp Version And Ms Office Xp Pre-Loaded. One Rs 232 Serial Communication Port Free For Interfacing Unit
  • Table For Set-Up Support

Technical Details:

  • Temperature Transmitter : Input Rtd Pt-100 (0-100°C), Output 4-20 Ma
  • Process Tank : Material Stainless Steel, Capacity 0.5 Lit
  • Heater : Nichrome Wire Heater, Capacity1 Kw
  • Thyristor Controller : Input 4-20ma For Heater
  • Flow Measurement : Rotameter
  • Piping : Size 1/4”
  • Interfacing Unit : For Input-Output Communication With Auto/Manual Facility
  • Micro-Processor Controller : Pid Setting, Auto Tuning, Fully Programmable With Serial
  • Communication
  • Software : For Experimentation, Pid Control, Data Logging, Trend
  • Plot, Offline Analysis And Printing
  • Instruction Manual : An English Instruction Manual Will Be Provided Along
  • With The Apparatus
  • The Whole Unit Is Assembled Rigidly On A Base Plate
Request
Callback
Yes! I am Interested

Time Constant Of Thermocouple Thermometer

The Setup Consists Of A Heat Source Controlled With The Help Of Digital Temperature Controller At Any Preset Value. A Thermometer/Thermocouple Pocket Is Provided To Insert The hermometer/Thermocouple In It. The Time Constant Of Different Thermometer/Thermocouple Can Be Calculated With The Set-Up. A Stopwatch Is Also Provided For Measurement Of Time. A Heat Sink Is Fitted To Cool Down Thethermometer/Thermocouple. All Components Are Assembled On A Base Plate To Form Table Top Set-Up.

Experimentation:

  • To Determine Time Constant Of A Given Thermometer/Thermocouple

Utilities Required:

  • Electricity Supply : 220 V Ac, Single Phase, 0.5 Kw
  • Ice
  • Table For Set-Up Support

Technical Detail:

  • Heat Source : Provided With Ceramic Insulation
  • Heater : Nichrome Wire Heater
  • Temp. Controller : Digital Temperature Controller, 0 To 200°C
  • Ice Pot : Compatible Capacity
  • Thermometer : Glass Thermometer, Range 0-100°C
  • Thermocouple : Fe-Constantan Type
  • Instruction Manual : An English Instruction Manual Will Be Provided Along
  • With The Apparatus
  • The Whole Unit Is Assembled Rigidly On A Panel Plate
  • Most Of The Parts Are Powder Coated And Rests Are Painted With Auto Paints
Request
Callback
Ask For Price
Yes! I am Interested

Two Tank Interacting System

Two Tank Interacting System
  • Two Tank Interacting System
Ask For Price
The Setup Studies Behavior Of Multi Capacity Process When Connected In Interaction Mode. It Consists Of Supply Tank, Pump For Water Circulation, Rotameter For Flow Measurement, Two Independent Process Tanks With Scales Connected In Interacting Mode. The Components Are Assembled On Frame To Form Tabletop Set-Up.

Experimentation:

  • To Obtain Experimentally The Step Response And To Compare The Experimental And Theoretical Responses

Utilities Required:

  • Water Supply
  • Drain
  • Electrical Supply: 1 Phase,220v Ac, 0.5kw
  • Stop Watch
  • Table For Set-Up Support

Technical Details:

  • Process Tank : Material Stainless Steel, Circular, With Graduated Level Scale ( 2
  • Nos.) Capacity 2.5 To 3.5 Litres
  • Supply Tank : Material Stainless Steel, Capacity 20 Litres
  • Overhead Tank : Material Stainless Steel, Capacity 5 Litres
  • Water Circulation : Fhp Pump, Tullu/Standard Make
  • Piping : Ss/Pvc, Size ¼”
  • Flow Measurement : Rotameter
  • Instruction Manual : An English Instruction Manual Will Be Provided Along
  • With The Apparatus
  • The Whole Unit Is Assembled Rigidly On A Base Plate
  • Most Of The Parts Are Powder Coated And Rests Are Painted With Auto Paints
Request
Callback
Yes! I am Interested

Two Tank Non Interacting System

Two Tank Non Interacting System
  • Two Tank Non Interacting System
Ask For Price
The Setup Studies Behavior Of Multi Capacity Process When Connected In Non Interaction Mode. It Consists Of Supply Tank, Pump For Water Circulation, Rotameter For Flow Measurement, Two Independent Process Tanks With Scales Connected In Non-Interacting Mode. The Components Are Assembled On Frame Toform Tabletop Set-Up

Experimentation:

  • To Obtain Experimentally The Step Response And To Compare The Experimental And Theoretical Responses

Utilities Required:

  • Water Supply
  • Drain
  • Electrical Supply: 1 Phase,220v Ac, 0.5kw
  • Stop Watch
  • Table For Set-Up Support

Technical Detail:


  • Process Tank: Material Stainless Steel, Circular, With Level Scale (2 Nos.)
  • Capacity 2.5 To 3.5 Litres
  • Supply Tank : Material Stainless Steel, Capacity 20 Litres
  • Overhead Tank : Material Stainless Steel, Capacity 5 Litres
  • Water Circulation : Fhp Pump, Tullu/Standard Make
  • Piping : Ss 304, Size ¼”
  • Flow Measurement : Rotameter
  • Instruction Manual : An English Instruction Manual Will Be Provided Along With The Apparatus
  • The Whole Unit Is Assembled Rigidly On A Base Plate
  • Most Of The Parts Are Powder Coated And Rests Are Painted With Auto Paints
Request
Callback
Yes! I am Interested
X
Looking for “Process Control Lab Equipment”?


Reach Us
Akash Nautiyal (Managing Director)
Plot No. 46/19/2, Near Bala Sundri Mandir Herman City Road, Chotta Khudda
Ambala Cantt, Ambala- 133001, Haryana, India


Call Us

Send E-mail

Send SMS