Quality Engineers

Heavy Duty Lathe Machine (CAPSTAN LATHE)

High Precision Heavy Duty Lathe Machine Bearing Type Head Stock& V-Belt Counter Complete with all std. accessories such as Gear Set, Center Adaptor, Dead Center, Dial Indicator, Square Tool Post, Tool Post Key with HARDENED BED.
 Height of Center(mm):250
 Width of Bed (mm):325
 Max Swing over bed (mm):500
 Max Swing over Slide (mm):300
 Max Swing in Gap:775
 Spindle Bore (mm):52
 Spindle Nose:6TPI
 Spindle Speed 8 (R.P.M):30 to 475
 Cross Slide Travel (mm):270
 Top Slide:150
 Lead Screw TPI:4TPI
 Tail Stock Sleeve:MT-4
 Power Required (H.P.):3
 Accessories :
 Electrical such as3HP1440RPM3PhaseElectricMotor,
 R/F Switch, V-Belt & Fittings
 10”x3JawPrecision True Chuck with Chuck Plate
 14”x4JawPrecisionDogChuckwithChuckPlate
 Steady Rest(150 mm hole Dia.)
 Follow Rest
 Face Plate(430 mm)
 Knob Type Gear Box:
 Revolving center MT – 4
 MT-4 Pipe Centre
 Coolant Pump with Tank and Fittings
 Taper Turning Attachment
 Machine lamp with control transformer & wiring but without lamp

HYDRAULIC HACKSAW MACHINE

8” Cap. Hydraulic Control Hacksaw Machine having Blade Size 16” x 1 ¼” Complete with all standard accessories as per maker's supply
 Cutting Round: 200
 Capacity Square: 150
 No of stroke per min: 100-125
 Blade Size (mm): 400x32
Approx Weight Kg: 350
 Motor (1440 RPM): 1 HP
 1 HP 1440 RPM 3 Phase Electric Motor: 1 No.
 R / F Switch, V-Belt & Fitting: 1 No.
 Hacksaw Blade (16” x 1 ¼”): 1 No.
 Foundation Rubber Pad: 4 Nos.
 Oil – Can: 1 No.
 Allen Key Set: 1 No.
 Spanner Set: 1 No.

Pillar Drilling Machine

20 Pillar Drilling Machine 20mm Cap / 8 Speed / 125mm Travel / 4’ Pillar Height
 Drilling Capacity (mm): 25
 Pillar Dia. (mm): 87
 Spindle Nose: MT-2
 Spindle Travel (mm): 125
 Spindle Center To Pillar Surface (mm): 200
 No. Of Spindle Speed: 8
 Spindle Speed (RPM): 87 - 3200
 Table Size (mm): 280x280
 Base Size (mm): 460x315
 Base To Spindle Nose (mm): 925
 Main Motor Power (HP): 0.5

Wood Turning Lathe machine

 with floor mounting

fitted with rack-slide lathe attachment
 Bed Length : 1.75 mtr.
 Height of centre : 150 / 200mm approx
 Width of Bed : 200mm
 Admit between centre : 1000mm approx. (
 Number of Spindle Speeds : 3
 Face Chuck Dia : 250mm approx.
 Power required :1 HP ( 1440 RPM)
Motorised model, complete with 1 HP electric motor, 440 volts, 3 phase

BELT SANDER

Sandingbelt:25mmx1067mmor1"x42"

Overall size : 63 x 28 x 34 cm or 25"x11" x13.5";

Table size: 22x18cmor8.5"x7"T

abletilt-8°to45°;

Exposed belt height 14.4 cm or 5 5/8";

Space behind belt 24.1 cm91/2";

Weight(withmotor)9kg(approx)20lbs(approx);

Motor Use an induction motor in the range of1450to3500RPM,1/4hpto1/2hp.

Oldclothes dryer motors, top loading washer motors, or furnace blower motor scan be used.