Quality Engineers

Quality Engineers are one of the leading manufacturers, suppliers, traders and exporters of optimum quality Epicyclic Gear Train Apparatus. This apparatus is manufactured from high quality raw material, which is procured from high known vendors. The quality controllers rigorously check the apparatus on the in-house quality check points.

Technical Description:

• The Gear Train is any combination of gear wheels by which motion is transmitted from one shaft to another shaft. In epicyclical gear trains, the axes of shafts on which the gears are mounted may move relative to a fixed axis. It is a motorized unit consisting of a SUN gear mounted on input shaft. Planet gears meshes with the annular gear. These planet gears are mounted on a common arm to which output shaft is fitted. Loading arrangement is provided for loading the system and to measure holding torque

Learning Objectives/Experiments:

• To measure epicyclical gear ratio between input shaft and output shaft (Actual and Theoretical).
• To measure input torque, holding torque and output torque

Control Panel:

• Digital RPM Indicator
• Standard make On/Off switch, Mains Indicator etc.
• Speed Control Unit.

Scope of Delivery:

• 1 Self-contained "Epicyclic Gear Train" Apparatus
• 1 Instruction Manual consisting of experimental procedures, block diagram etc.

Additional Information:

• Production Capacity: 5-10 Piece
• Delivery Time: 30-40 days

Quality Engineers offer optimum quality Universal Governor Apparatus to our valuable customers. This universal governor apparatus offered by us is commonly used for studying the working of different governors that normally controls the speed. In addition to this, the offered apparatus is available with us at highly reasonable market prices.

Technical Description:

• The set-up is designed to study the working of different governors normally used to control the speed. It consists of a main spindle, mounted vertically on the base plate. This spindle is driven by a variable speed Motor which is also mounted vertically on the same base plate. One governor assembly out of four can be mounted on spindle. The spindle speed is controlled by speed control unit. A graduated scale is fitted to the sleeve to measure the displacement.

Learning Objectives/Experiments:

• Determination of characteristic curve of a sleeve position against speed of rotation for all governors.
• To study the effect of varying the mass of the centre sleeve in Porter and Proell Governor
• To study the effect of varying the initial spring compression in Hartnell Governor.
• To study the determination of characteristics curves of radius of rotation against controlling force (Actual & Theoretical) for all governors.

Required for Operation:

• Digital Tachometer

Technical Specifications:

• Governor Mechanism: Four different types of governor mechanism with spring and weights.
• 1. Watt Governor
• 2. Porter Governor
• 3. Hartnell Governor
• 4. Proell Governor
• Motor: Variable speed, Standard Make, FHP Motor.
• Electricity Supply: 220 V AC, Single Phase, 0.5 kW
• Floor Space: 1.5 x 1.5 m
• Spindle Material: Stainless Steel
• The whole set-up is ingeniously designed and schematically arranged on a powder-coated rigid structure

Control Panel:

• Standard make On/Off switch, Mains Indicator etc.
• Speed Control Unit.

Scope of Delivery:

• 1 Self-contained "Universal Governor" Apparatus
• 1 Instruction Manual consisting of experimental procedures, block diagram etc.

Additional Information:

• Production Capacity: 5-10 Piece
• Delivery Time: 30-40 Piece

Quality Engineers offer Motorised Gyroscope at a reasonable market price. We manufacture motorized gyroscope in compliance with the industrial standards and norms in accurate dimensions to enable maximum functionality. Offered gyroscopes undergo several quality checks before the final stage of market dispatch. The gyroscopes we offer are easy to install and appreciated for hassle-free operation.

Technical Description:

• The set up consists of stainless steel disc mounted on a horizontal shaft, rotated by a variable speed motor. The rotor shaft is coupled to a motor mounted on a trunion frame having bearings in a yoke frame, which is free to rotate about vertical axis. A weight pan on other side of disc balances the weight of motor. Rotor disc can be move about three axis. Torque can be applied by calculating the weight and distance of weight from the centre of rotor. The gyroscopic couple can be determined.

Learning Objectives/Experiments:

• Experimental justification of the equation T = I. .p. for calculating the gyroscopic couple by observation and measurement of results for independent vibrations in applied couple T and precession p.
• To study the gyroscopic effect of a rotating disc.

Required for Operation:

• Electricity Supply: 230 V AC, Single Phase, 0.5 kW
• Digital Tachometer

Control Panel:

• Standard make On/Off switch, Mains Indicator etc.
• Speed Control Unit.

Scope of Delivery:

• 1 Self-contained "Motorized Gyroscope" Apparatus
• 1 Instruction Manual consisting of experimental procedures, block diagram etc.

Optional:

• Digital Tachometer

Additional Information:

• Production Capacity: 5-10 piece
• Delivery Time: 30-40 days

Owing to our domain expertise and the assistance of a dedicated workforce, we are engaged in offering best quality Static and Dynamic Balancing Apparatus at the most affordable market price. Offered products are manufactured under strict supervision in accordance with the industry set norms and parameters. Appreciated for their sturdy construction, minimum electricity consumption and hassle-free operation, these products are highly demanded among the clients.

Technical Description:

• This equipment is designed for carrying out the experiment for balancing a rotation mass system. The apparatus consists of a stainless steel shaft fixed in a rectangular frame. A set of four blocks with a clamping arrangement is provided. For static balancing, each block is individually clamped on shaft. For dynamic balancing, a moment polygon is drawn using relative weights and angular and axial position of blocks is determined. The block are clamped on shaft is rotated by a motor to check dynamic balance of the system. The system is provided with angular scale and is suspended with chains for dynamic balancing.

Learning Objectives/Experiments:

• To balance the masses statically and dynamically of a single rotating mass system.
• To observation of effect of unbalance in a rotating mass system
• The whole set-up is ingeniously designed and schematically arranged on a powder-coated rigid structure

Control Panel:

• Standard make On/Off switch, Mains Indicator etc.
• Speed Control Unit.

Scope of Delivery:

• 1 Self-contained "Static & Dynamic Balancing Demonstrator" Apparatus
• 1 Instruction Manual consisting of experimental procedures, block diagram etc.

Additional Information:

• Production Capacity: 5-10 Piece
• Delivery Time: 30-40 days

Quality Engineers is instrumental in offering high quality Slip and Creep Measurement Apparatus to our prestigious customers. Manufactured in compliance with the industry set standards, this apparatus is widely used to measure co-efficient of friction between pulley and belt. Due to their highly efficiency and low maintenance, this apparatus is highly demanded in the market.

Technical Description:

• This apparatus is useful for measurement of power transmitted for various input power conditions with varied belt tension. Belt slip or creep also can be measured. The apparatus consists of a variable speed motor, driving pulley and driven pulley of equal diameters. The pulleys are mounted on input shaft (motor shaft) and output shaft. The driven pulley can slide on the base only with bearing block to change the initial tension in belt. Brake drum is mounted on the output shaft, which helps to measure power output. The motor speed is varied by variable speed drive. A double channel digital speed indicator indicates driving and driven pulley speeds. With the help of Stroboscope (optional) it is possible to demonstrate the slip of belt on driving and driven pulley.

Learning Objectives/Experiments:

• To measure co-efficient of friction between pulley material and different belt materials.
• To measure power transmitted with varied belt tension
• To measure percentage slip at fixed belt tension by varying load on the brake drum and plot the graph of (T1-T2) v/s percentage slip i.e. “Slip Characteristics”.
• To measure belt slip speed and observe the limiting value of load at constant speed when the slip just starts.
• To study creep of belt.

Control Panel:

• Standard make On/Off switch, Mains Indicator etc.
• Speed Control Unit.

Scope of Delivery:

• Self-contained " Slip and Creep Measurement" Apparatus
• Instruction Manual consisting of experimental procedures, block diagram etc.

Additional Information:

• Production Capacity: 5-10 piece
• Delivery Time: 25-30 days
• Packaging Details: safe carton

Technical Description:

• The setup is a motorized unit consisting of a camshaft driven by a variable speed motor. The free end of the camshaft has a facility to mount the cam easily.The follower is properly guided in gunmetal bushes and the type of follower can be changed according to the cam under test. Graduated circular protractor is fitted co-axial with the shaft and dial gauge fitted on the follower shaft, is used to note the follower displacement for the angle of cam rotation. A spring is used to provide controlling force to the follower system. Weights on the follower shaft can be adjusted as per the requirement. An arrangement is provided to regulate the speed. The apparatus is very useful for testing the cam performance for jump phenomenon during operation and the effect of change of inertia forces on jump action of cam-follower during operation can be observed. Three sets of cams and followers are supplied with the apparatus. These are already hardened to reduce the wear.

Learning Objectives/Experiments:

• To plot the(Follower displacement Vs Angle of rotation) curves for different cam follower pairs
• The follower bounce can be observed by using a stroboscope (Optional) & effect of follower weight on bounce can be studied.
• To study the effect of follower weight on bounce.
• To study the effect of spring compression on bounce

Required for Operation:

• Floor Area 0.5 m x 1 m
• Electricity Supply 220 V AC, Single Phase, 0.5 kW
• Digital Stroboscope to view the jump phenomena.
• Digital Tachometer

Control Panel:

• Standard make On/Off switch, Mains Indicator etc.
• Dial Gauge: Baker & Mercer/Standard Make
• Speed Control Unit.

Scope of Delivery:

• 1 Self-contained "Cam Analysis" Apparatus
• 1 Instruction Manual consisting of experimental procedures, block diagram etc.

Additional Information:

• Production Capacity: 5-10 piece
• Delivery Time: 30-40 days

Our company holds expertise in offering optimum quality Whirling of Shaft Demonstrator to our esteemed customers. The apparatus offered by us is precisely engineered from optimum quality stainless steel, which is procured from well known vendors. The offered apparatus is commonly used for studying the phenomenon of whirling of shafts.

Technical Description:

• The set up is designed to study the whirling of shafts. The set-up consists of a sturdy frame, bearing holders, variable speed motor etc. to drive the shaft along with speed control unit. Different bearing can be fitted in bearing block to have different end conditions i.e. both end fixed, one end free and one end fixed etc. As the test is destructive, hence the shaft cannot be used again.
• Kinematic coupling bearing for fixed or free ends without restraint.
• The whole set-up is ingeniously designed and schematically arranged on a powder-coated rigid structure

Learning Objectives/Experiments:

• Display of various modes of whirl for a shaft with
• Both ends directionally fixed
• One ends fixed and other free
• Both ends directionally free
• Modes of vibrations can be studied and frequency can be measured in each case

Required for Operation:

• Floor area of 2m x 0.5 m
• Digital Tachometer

Control Panel:

• Standard make On/Off switch, Mains Indicator etc.
• Speed Control Unit.

Scope of Delivery:

• 1 Self-contained "Whirling Shaft Demonstrator" Apparatus
• 1 Instruction Manual consisting of experimental procedures, block diagram etc.

Additional Information:

• Production Capacity: 5-10 Piece
• Delivery Time: 30-40 days

Quality Engineers are among the top most manufacturers, traders and exporters of optimum quality Universal Vibration Apparatus. This apparatus is manufactured under the supervision of qualified professionals, using the best quality raw materials. Offered apparatus is useful to study various experiments and to verify the principles and relations pertaining to the study of vibrations.

Technical Description:

• The apparatus provided comprehensive unit to perform the vibration experiments. A universal frame is provided upon which quick and easy assembly of various experiments can be done. The unit is self-contained to safely store spares. The students can easily assemble the experiments and study the theory of vibrations practically.

Learning Objectives/Experiments:

• To verify the relation simple pendulum.
• To verify the relation of compound pendulum & to determine the radius of gyration.
• To study radius of gyration of bi-filar suspension.
• To study the undamped free vibration of spring mass system.
• To study the longitudinal vibration of helical coiled spring.
• To study the forced vibration of simply supported beam for different damping.
• Undamped tensional vibrations of single rotor system.
• Undamped torsion vibrations of double rotor system.
• To study the damped torsional vibration of single rotor system and to determine the damping coefficient.
• Verification of Dunker ley's Rule.
• To study the forced damped vibration of spring mass system.

Control Panel:

• Digital RPM Indicator
• Standard make On/Off switch, Mains Indicator etc.
• Speed Control Unit.

Scope of Delivery:

• 1 Self-contained "Universal Vibration" Apparatus
• 1 Instruction Manual consisting of experimental procedures, block diagram etc.

Additional Information:

• Production Capacity: 5-10 Piece
• Delivery Time: 30-40 days

Owing to the rich industrial experience, we have been able to offer high-quality Coriolis Component Of Acceleration to our esteemed customers. This apparatus is commonly used for studying the deflection of moving objects when they are viewed in a rotating reference frame. Due to the hassle free installation, the offered apparatus is highly appreciated in the market.

Additional Information:

• Production Capacity: 15 pc. per qtr.
• Delivery Time: 15-30 Days
• Packaging Details: Safe Carton

DESCRIPTION: The set-up is designed to study Coriolli's Component of Acceleration of a slider crank mechanism. Here the mechanical slider system is replaced by a continuous stream of water flowing through a steady rotating pair of tubes. These tubes can be rotated at various speeds by using a swinging field motor which also acts as dynamometer. A Perspex window on top of the tank gives clear view of the process and prevents splash of the water over the side of the tank. The dynamometer continuously measures torque applied to the rotating tubes. The equipments is self contained, water recirculating, provided with its own speed control unit and water circulating pump.

Additional Information:

• Production Capacity: 5-10 Piece
• Delivery Time: 30-40 Days