Petroleum Lab

Used for determining of the closed cup Flash point of Petroleum Products, their mixtures, others liquids & Paints having Flash Point below 700C. The apparatus consists of one brass cup and cover fitted with shutter mechanism test flame arrangement (Oil test jet or Gas test jet) and stirrer, placed on a water bath made of Stainless Steel double walled. The outer jecket of the water bath is fitted with a stand. For electrically heated apparatus heater is fitted to the stand the heat of which may be controlled different temperature regulation system of operated on 220 Volts AC mains. For Gas heated model the drum is heated by a burner (without burner).

• Production Capacity: 5-10 Piece
• Delivery Time: 30-40 days

Used for determining the Viscosity of fuel oil and lubricating oil both thin & thick. The apparatus consists of Stainless Steel bath with oil cup which is centrally placed in a water bath. The bath has a lid which contains a water cooling tube, two handle with two stirrer blades, thermometer socket and a straight heater, stirring is done by turntable arrangement. A thermometer can also be inserted into the cup cover. The jets one universal and one Furol can be screwed to the cup by a handle (without strainer, withdrawal tube and glasswares) can operate on 220 Volts AC mains.

This is widely used for determination of closed cup Flash Point of Fuel Oil, cut back asphalts, other viscous material and suspension of solids having a flash point about 490C(1200F). The apparatus consists of Brass Test cup with handle removable cup cover with spring operated rotating shutter having piolet jet, stirrer with flexible shaft. The assembly rests in Air Bath which is covered with Dome shape metal top. The cup is fitted with insulated handle and locking arrangement near cup plange. The assembly rests on a round shaped heater with different temperature regulation system suitable for operation on 220 Volts AC mains.

• Production Capacity: 5-10 Piece
• Delivery Time: 30-40 Days

Optional Accessories:

Ø  Cleaveland Flash Point Apparatus electric heated with energy regulator control.

Ø  Same as above but oil wick arrangement.

Ø  Cleaveland Flash Point Apparatus with concealed Hot plate.

Ø  Cleaveland Flash Point Apparatus electric heated with voltage varric copper coil type.

Ø  Cleaveland Flash Point Apparatus with voltage copper coil type.

• Production Capacity: 5-10 Piece
• Delivery Time: 30-40 days

Redwood viscometer apparatus are widely used in Petroleum Laboratories, Industries, Oil Refineries, Educational Institutions, Research Organisations for standerdisation and determines the Viscosity of Petroleum products, which flows in a newtonian liquid except cut back Bitumens and road oils at the set temperature.Two adaption of Redwood Viscometers are available.Redwood Viscometers No. I for liquids having Redwood Flow 20 seconds to 2000 Seconds and Redwood Viscometers No. II exceeds 2000.The complete outfit comprises hemmertone finish, copper/Stainless steel bath with drain plug, electrical heating arrangement, Suitable to operate at 220 Volts 50 Hz AC mains Or gas heating arrangement with silver plated oil cup with precision stainless steel jet, ball value, cover, thermometer clip,stirrer and suitable stand with levelling screws. The sample required to be tested, is to fill in to the required level as indicated by the gauge in a cup having a Stainless Steel jet fixed in the bottom. The temperature is maintained during the test by heating the liquid in a bath surrounding the cup,and the flow time for 50 ml of the sample is measured.

• Production Capacity: 5-10 Piece
• Delivery Time: 30-40 days

This is made as a specified by IP-15, ASTM-D-97/57 & IS-1448-1970 the pour point is the lowest tempertaure at which the oil will just fail to flow. The apparatus consists of a main cooling bath made of stainless steel sheet and stand unit with drain plug and cover with provision for fitting thermometer and a filling aperture for adding freezing mixture. A glass jar for containing oils, jacket, disc and gasket as specifed are also provided.

• Production Capacity: 5-10 Piece
• Delivery Time: 30-40 Days

This apparatus is used for penetration test on a wide variety of materials such as grease, Petroleum, Bitumen, Tar, Wax, Polish, food stuff, Rubber asphalts and pharmaceuticals Creams.A given force is applied over a given of a millimeter and expressed as penetration.It consists of a head support mounted on a vertical rod which can be adjusted for height. A rack and pinion and pointer assembly provides fine adjustment of a needle tip to sample and incorporates a slipping clutch mechanism which make reading of Penetration and subsequent resetting of a sample and accurate operation. The dial is graduated from 0-400 in on tenth millimeter Sub Division. The instrument is supplied with two samples containers made of aluminium. The penetration is the distance in millimeter that a standard needle penetrates vertically into a sample of the material under fixed conditions of loading time and temperature. This instrument measures the reading on round dial fitted on a Aluminium Painted stand having adjustable penetration needle, holder sample container and transfer dish.

• Production Capacity: 5-10 Piece
• Delivery Time: 30-40 days

This is used for determining drop point of greases as per IP 31,132 & ASTM-D-566. It is an indication of the critical temperature of the solid or semi solid to the liquid state. The apparatus consists of brass sleeve and case with metal cup and a glass boiling tube with cork fitted to a bath (Beaker) is provided. A stirrer is also provided in the bath.

 

Ø  Drop Point Apparatus hand operated stirrer

Ø  Drop Point Apparatus with FHP Motorised stirrer and electrical heater with energy regulater control IP-31.

Ø  Same as above electric heated by concealedhot plate.

Ø  Drop Point Apparatus as per IP 132 and ASTM-D-566

Same as above electric heated by concealed Hot Plate

• Production Capacity: 5-10 Piece
• Delivery Time: 30-40 days

This apparatus is meant for determination of softening point of Bituminious materials according to IP 58 and IS 1205-1958. Softening point is that temprature at which the speciman under test becomes soft enough to allow a steel ball of specific dimension to fall a required distance under test condition. The apparatus consists of glass beaker,ring stand two steel balls with ring and ball guides & hand stirrer.

Ø  IIC-412     Softening Point Apparatus(without glass beaker)

Ø  IIC-412C   Softening Point Apparatus(with glass beaker)

Ø  IIC-412/A  Softening Point Apparatus (Ring & Ball Apparatus),with electric motorised stirrer and electric heater ,stand with temperature regulator.

Ø  IIC 412/B  Softening pointapparatus with motorised stirrer , electric heated by concealed hot plate with temperature regulator.

• Production Capacity: 5-10 Piece
• Delivery Time: 30-40 days

As per IP 72 and IS 1206 it is used for determining the Viscosity of cut back Bitumen and road oil. It consist bath with cup of 10mm or 4mm erific and sleeve stirrer with ball lifting clip and ball. The assembly is kept on suitable stand with leveling screws .Suitable to operate on 220 Volts AC mains.

 

Ø  IIC - 435 Electric heated (without control)

Ø  IIC - 435/A Electric heated with separate energy regulator control.

Ø  IIC - 435/B Electric heated with solid state electronic regulator.

Ø  IIC - 435/C Electric heated with voltage varric copper coil type.

Ø  IIC - 435/D Electric Heated with digital temperature controller cum indicator.

Ø  IIC - 572 Multiple Tar Viscometer for 6 test cups with thermo state control & FHP electric motor stirrer.

IIC -572/A Multiple Tar Viscometer for 6 test cups Apparatus with digital temperature controller cum indicator & FHP electric motor stirrer.

• Production Capacity: 5-10 Piece
• Delivery Time: 30-40 days

This Viscometer bath is used to maintain the correct constant temperature for estimating Kinematic Viscosity of Oil and Petroleum Products in this type of bath various viscometers may be fixed as an internal part of the bath. The bath is rectangular shape. Inside tank is made of Stainless Steel Sheet. Two sides toughed glass window provided for full visibility of objects inside the bath. The bath is controlled by an electronic relay and contact Thermometer or Digital Temperature controller cum indicator. Temperature range 50C above room temperature to 1000C.Accuracy plus minus 0.10C. Stirring is done by a FHP electric motor stirrer. Heating is done by means of tubular type heater fitted on top of the bath. It is supplied with viscometer tube holders and stainless steel cover. Different size & accommodation are available as under without Viscometer tube.

• Production Capacity: 5-10 days
• Delivery Time: 30-40 days

Made in accordance with specifications as IP 24, 123 and 1448(P:18)1967.This apparatus is used for determination of distillation characteristic of Petroleum Products. The instrument consists of metal shield fitted with asbestos board to support distillation flask with GEARED height adjustable device. It has slide for vapor tube and lining having glass window for Clear view of inside objects. The condenser bath is provided with Mild Steel black painted stand (without glass wares) electrically operated on 220 volts AC mains

• Production Capacity: 5-10 Piece
• Delivery Time: 30-40 days

It is used for determination of heat of combustion, calorific value and sulphur contents of solid and liquid fuels. The Bomb body and lid are machined from corrosion resisting stainless steel rod  .It's capacity is approx .300ml .It is provided with high pressure valve and electrodes .The calorimeter vessel and electrodes. The calorimeter vessel /stirrer FHP motor are provided and water jacket as per IP. The Bomb calorimeter is supplied with firing unit, Digital, Pallet press, ignition Nichrome wire and pressure gauge with copper pipe fitting.

• Production Capacity: 5-10 Piece
• Delivery Time: 30-40 days

It is used to determine the amount of carbon deposit when oil is evaporated under specified condition. The Carbon residue values or crude oil, residue etc. are useful in the manufacture of various lubricants. The Apparatus consists of Spun Sheet Iron Crucible 25cc capacity, sheet iron hood and sheet iron block on a stand with triangular wire bridge.

Ø  IIC-561: Conradson Carbon Residue Apparatus without Gas burner (Single test Apparatus)

Ø  IIC-562: Conradson Carbon Residue Apparatus Without Gas burner(Four Test Apparatus)

• Production Capacity: 5-10 Piece
• Delivery Time: 30-40 days

Used for detecting the presence of corrosive sulphur in petroleum products. The apparatus consists of a bath either dual purpose (500C & 1000C) or a boiling bath (1000C only) without stainless steel bomb and copper strips of definite size 6 bombs or 18 test tubes can be accommodate in each type of bath with different temperature regulation system to operate on 220 volts AC. mains.

Ø  IIC– 573: Copper strip corrosion Test Apparatus as per IP 154 without thermometer only bath of 6 bombs (500C & 1000C) with energy regulator controller without bomb.

Ø  IIC– 574: Same as above but controlled by Thermo state.

Ø  IIC– 575: Same as above controlled by digital temperature controller cum indicator with contractor.

• Production Capacity: 5-10 Piece
• Delivery Time: 30-40 days